2017 Zenvo TS1 Dimensions, Size & Specs

The curb weight of the Zenvo TS1 is 1710 kg (approximately 3,770 lbs). For a hypercar with such a powerful engine and advanced technology, this weight is a balanced compromise between lightweight engineering and structural integrity. The relatively low weight for its size helps ensure agile handling and rapid acceleration. Additionally, weight distribution and chassis tuning contribute to the vehicle’s dynamic performance on the road and track, allowing it to fully utilize its engine power while maintaining stability and driver control.

The Zenvo TS1 offers a ride height or ground clearance of 160 mm (about 6.3 inches). This low clearance is typical for high-performance sports cars and hypercars, favoring aerodynamic efficiency, cornering performance, and stability at high speeds. However, this means the TS1 is best suited for smooth paved roads and performance driving conditions. Drivers should be cautious on uneven surfaces, steep driveways, and speed bumps to avoid scraping the undercarriage.

The Zenvo TS1 is equipped with front and rear wheels designed for maximum grip and performance. The front rims measure 9.5J x 19 inches fitted with 265/35 R19 tires, which offer a balance of handling and ride quality. At the rear, the rims are significantly wider at 12.5J x 20 inches paired with 345/30 R20 tires. This staggered setup provides superior rear traction to handle the car’s powerful engine output, especially during acceleration and cornering, enhancing overall driving dynamics and road contact.

The Zenvo TS1 offers a luggage capacity of 135 liters, which converts to roughly 4.8 cubic feet of storage space. This amount of luggage space is quite limited, reflecting the car’s focus on performance and design rather than practicality. The luggage compartment is best suited for small bags or light travel gear, making the TS1 more appropriate for short drives or track days rather than long-distance journeys where significant storage is required.

The Zenvo TS1 measures 2155 mm (approximately 84.8 inches) wide and has a height of 1198 mm (about 47.2 inches). Standard residential garages typically have widths ranging from 2400 mm (8 feet) for single-car garages to wider for double-car garages, and ceiling heights around 2100 mm (7 feet). While the TS1’s width is near the upper limit of some garages, it should fit in most standard single-car garages without difficulty. The low height of the TS1 presents no clearance issues. However, owners should be cautious with garage door widths and possible obstacles given the car’s broad stance.

The Zenvo TS1 is the first iteration bearing this particular model designation starting production in 2017 and continuing to the present, so it does not have a direct predecessor model named TS1. However, compared to earlier Zenvo vehicles such as the ST1, the TS1 offers refined proportions and enhanced engineering. The ST1 was larger and heavier overall, while the TS1 is slightly more compact with improved aerodynamics and reduced weight, helping boost performance. The TS1’s dimensions and tuning represent an evolution toward optimized performance handling and exclusivity in the hypercar segment.

When compared to other hypercars like the Bugatti Chiron, Koenigsegg Agera, or Pagani Huayra, the Zenvo TS1's dimensions are competitive but distinct in some ways. The TS1's length of 4680 mm (184.3 inches) is slightly shorter than many of its peers which often exceed 4800 mm (189 inches). Its width of 2155 mm (84.8 inches) is on the wider side, giving it a commanding stance. The height at just 1198 mm (47.2 inches) is consistent with the low-profile design of most hypercars to reduce drag and lower the center of gravity. Overall, the TS1’s dimensions reflect a blend of compactness and aggressive road presence tailored for track performance and road usability.

The Zenvo TS1 stands out through its exclusive Danish design philosophy combined with extreme performance engineering. Unlike many production coupes, the TS1 integrates a hand-built approach with cutting-edge aerodynamics, a potent engine setup, and bespoke craftsmanship. Features such as active aero components, a wide body with aggressive styling, and advanced suspension systems set it apart. Its lightweight yet rigid structure contributes to exceptional handling, while the exclusivity and limited production numbers make it a collector’s item beyond just performance metrics.

Despite its aggressive exterior dimensions, the Zenvo TS1 is designed to seat two adults comfortably in its coupe configuration. The interior space is focused on driver engagement with ergonomic seating, premium materials, and controls oriented towards performance driving. The width of 2155 mm (84.8 inches) allows for a spacious cockpit area for both driver and passenger, though headroom is naturally limited due to the low height of 1198 mm (47.2 inches). The overall design prioritizes an immersive experience rather than maximizing interior volume, consistent with its hypercar character.