2023 XPENG P7i (facelift 2023) Dimensions, Size & Specs

The XPENG P7i has a curb weight of 2040 kg (approximately 4498 lbs), which is fairly typical for an electric sedan of its size equipped with advanced battery technology. This weight contributes to the car's stability and ride comfort but also requires efficient electric powertrain engineering to maintain strong acceleration and range. The weight distribution and chassis tuning help the P7i deliver dynamic handling despite being over 2 tons.

The XPENG P7i comes with a ground clearance of 113 mm (4.45 inches), which is relatively low, typical for electric sedans focused on aerodynamics and performance. While this height helps reduce air drag and improves handling, it means the car is better suited for smooth urban and highway roads rather than rough terrain or poorly maintained roads. Drivers should be mindful of speed bumps and steep driveways.

The XPENG P7i offers rim sizes of 18 and 19 inches, paired with tire sizes 245/50 R18 and 245/45 R19 respectively. Larger 19-inch rims tend to provide a sportier look and can enhance cornering grip and responsiveness at the expense of a slightly firmer ride. The 18-inch rims offer a balance of comfort and handling with potentially better ride absorbance on uneven surfaces.

Yes, the XPENG P7i fits comfortably within standard residential garage dimensions. At 4888 mm (192.3 inches or roughly 16 feet) in length and 1896 mm (74.6 inches or about 6.2 feet) in width, it is well within typical garage sizes in many countries, which often accommodate vehicles up to around 5 meters long and 2.5 meters wide. However, drivers should consider extra space for opening doors and storage when parking inside a garage.

The 2023 XPENG P7i facelift maintains very similar exterior dimensions compared to the original XPENG P7 model. Both share a length just under 4.9 meters and a width close to 1.9 meters, with minimal changes in height and weight. The facelift mainly introduces aesthetic and technological upgrades rather than significant size alterations, ensuring that the P7i continues to offer the spacious and aerodynamic profile that was popular in its predecessor.

The XPENG P7i's dimensions (4888 mm length, 1896 mm width, 1450 mm height) put it in the mid-to-large electric sedan category. When compared to competitors like the Tesla Model 3 (which is slightly shorter and narrower) or the Polestar 2, the P7i generally provides a bit more length and width, potentially offering more interior space, especially for rear passengers. It is a competitive size for comfort and presence in its segment.

Given its external dimensions, particularly the length of 4888 mm and width of 1896 mm, the XPENG P7i offers a roomy cabin layout for front and rear passengers. The low height of 1450 mm helps keep a sleek roofline without drastically compromising headroom. The wide stance contributes to substantial shoulder room, and the design maximizes legroom too. The interior is designed to be spacious, comfortable, and luxurious, with ample space for five adults.

With a ground clearance or ride height of just 113 mm (about 4.45 inches), the XPENG P7i is optimized for aerodynamic efficiency and sporty handling rather than off-road capability. This low clearance enhances stability at higher speeds and improves the car’s center of gravity, resulting in better cornering and responsive steering. However, drivers should be cautious on rough or uneven surfaces to avoid scraping the underbody or front spoiler.

The 2023 XPENG P7i is available primarily as a sedan and coupe, but the manufacturing dimensions such as length (4888 mm), width (1896 mm), and height (1450 mm) remain consistent across these versions. The coupe version may have minor styling differences, particularly in roofline design, giving it a sportier silhouette, but this does not significantly affect the fundamental size or interior volume compared to the sedan variant.