2019 Toyota HiAce VI (H300) Crew Van L1H1 Dimensions, Size & Specs

This generation of the Toyota HiAce crew van has a curb weight of 2305 kg (approximately 5085 lbs), which refers to the weight of the vehicle without passengers or cargo but with standard equipment and fluids. Its maximum gross vehicle weight rating (GVWR) is 3300 kg (approximately 7275 lbs), meaning it can safely carry a combined load of passengers, cargo, and accessories up to this limit.

When the rear seats of the Toyota HiAce VI Crew Van L1H1 are folded down, the van offers a massive luggage capacity of up to 3600 liters (approximately 127 cubic feet). This spacious rear compartment is well-suited for transporting bulky equipment, tools, or passenger gear, making this vehicle highly practical for commercial and family use that requires extensive cargo room.

The HiAce VI Crew Van L1H1 rides on 7J x 16 rims equipped with tires sized at 215/70 R16. This setup offers a good balance of ride comfort, load capacity, and traction, tailored to support the vehicle’s weight and typical urban and highway driving conditions. These tires are also relatively common, making replacement and maintenance convenient.

With a length of 5265 mm (207.1 inches) and a width of 1950 mm (76.8 inches), the HiAce VI Crew Van L1H1 is quite large, approaching the upper limits of many standard residential garages. Standard garages usually have widths around 2400-2700 mm and depths of 4800-6000 mm. While it fits, maneuvering may be tight, especially in older or narrower garages, so careful measurement of your own garage space is recommended before purchase.

Compared to the previous HiAce generation V (H200), the HiAce VI (H300) Crew Van L1H1 is larger in several dimensions. The H300’s length of 5265 mm (207.1 inches) is an increase over the typical H200 length range of roughly 4950-5360 mm, depending on configuration. The H300’s increased width (1950 mm or 76.8 inches) also tends to be wider than most H200 variants (which typically range around 1690-1880 mm). This results in more interior space and comfort but slightly reduces maneuverability in tight urban settings compared to some H200 models.

The HiAce VI Crew Van L1H1 is comparable in size to other full-size commercial vans like the Ford Transit Custom and Nissan NV350 Caravan. Its length of 5265 mm (207.1 in) and width of 1950 mm (76.8 in) put it into the large van category, offering one of the more spacious cabins and cargo areas in its class. While not as wide or tall as some heavy-duty vans, it balances size and drivability well, making it competitive for both commercial and crew transport uses.

The HiAce VI Crew Van L1H1 is designed primarily as a crew van, typically offering seating for up to five or six occupants depending on seat arrangements. The interior prioritizes passenger comfort and functionality with flexible rear seat folding options to maximize cargo space. The front seats often include ergonomic adjustments and good visibility to support long-distance and daily commuter use.

The HiAce VI (H300) introduced in 2019 brought several improvements over older models, including enhanced safety features like advanced driver-assist options, improved fuel efficiency, and a more modern, aerodynamic design that reduces wind noise and improves comfort. The interior was upgraded for better ergonomics and increased cargo flexibility, making it more suitable for diverse commercial and passenger needs.

The 215/70 R16 tires combined with 7J x 16 rims are designed to support the substantial weight of the HiAce VI Crew Van, which has a curb weight of 2305 kg and maximum gross weight of 3300 kg. This tire size balances load-bearing capacity and ride comfort, suitable for frequent urban, suburban, and intercity driving. Their common size facilitates replacement, and the rim width provides stability when carrying heavy loads or multiple passengers over long distances.