2010 Toyota Crown XIII Royal (S200, facelift 2010) Dimensions, Size & Specs

The curb weight of the Toyota Crown XIII Royal (S200, facelift 2010) ranges from 1600 to 1690 kilograms (approximately 3527 to 3725 pounds), depending on the specific configuration and trim level. The maximum allowable weight varies between 1875 and 1965 kilograms (about 4134 to 4332 pounds), reflecting the car's robust build and capacity for passengers and cargo.

The ride height or ground clearance of this model ranges from 150 mm to 155 mm (approximately 5.9 to 6.1 inches). This ground clearance is typical for luxury sedans, providing a balanced combination of comfortable ride quality and sufficient clearance for urban environments. However, care should be taken on rough terrain or speed bumps to avoid scraping.

The Toyota Crown XIII Royal facelift is equipped with either 16-inch or 17-inch rims. Corresponding tire sizes are 215/60 R16 and 215/55 R17 respectively. These tire dimensions contribute to the car's smooth ride and handling dynamics, ensuring good traction and stability.

Given its dimensions—4870 mm (191.7 inches) in length and 1795 mm (70.7 inches) in width—the Toyota Crown XIII Royal generally fits within standard single-car garage dimensions, which are typically around 2400 mm (94.5 inches) wide and 4800 mm (189 inches) deep. The Crown's length slightly exceeds the typical garage depth, so it may require careful parking or garages on the larger side for comfortable fit without obstruction. Height clearance is usually not an issue.

Compared to its predecessor, the S180 series, the Toyota Crown XIII Royal (S200 facelift) saw modest changes in size. The length increased slightly, offering more cabin space and legroom for passengers while maintaining a similar width and height profile. Weight also increased moderately due to added features and safety enhancements, reflecting a focus on luxury and comfort without compromising agility.

In comparison to similar luxury sedans like the BMW 5 Series or Mercedes-Benz E-Class from the same era, the Toyota Crown XIII Royal is slightly longer and sometimes heavier. Its 4870 mm length offers more rear passenger space, though it is marginally narrower than some German counterparts. Its ride height is typical, offering a balance between comfort and sporty handling. Overall, the Crown emphasizes spacious rear seating and a comfortable ride.

The Toyota Crown XIII Royal is designed as a premium sedan, comfortably seating five passengers. Thanks to its generous exterior dimensions, inside the cabin there is ample legroom and headroom, especially in the rear seats. The slightly increased length compared to previous generations enhances passenger comfort, making it ideal for executive transport and long journeys.

The Toyota Crown XIII Royal (S200 facelift) featured a range of engine options, typically including inline six-cylinder petrol engines like the 3.0L and 3.5L variants. Fuel efficiency varied depending on the engine and drivetrain, with average fuel consumption around 8 to 11 liters per 100 km (21 to 27 mpg US). These engines balanced power and refinement, suitable for luxury performance driving.

The 2010 facelift of the Toyota Crown XIII Royal refined exterior styling through updates to front and rear fascias, including redesigned headlights, grille, and rear lamps that gave the sedan a more modern and sophisticated appearance. Interior enhancements focused on materials quality, updated instrumentation, and technology upgrades to maintain competitiveness in the luxury segment. These changes aimed to bolster the premium image of the Crown while keeping the core dimensions unchanged.