1995 Toyota Crown Comfort (XS10) Dimensions, Size & Specs

The curb weight of the Toyota Crown Comfort (XS10) ranges from 1280 kg to 1340 kg (2822 to 2954 lbs), depending on specific configurations and equipment. Its maximum weight or gross vehicle weight ranges between 1565 kg and 1670 kg (3450 to 3682 lbs). This weight range reflects the vehicle's structural design and allowable load, encompassing passengers and cargo. The moderate weight contributes to its fuel efficiency and stable driving characteristics, especially suitable for constant city usage and taxi operations.

The Toyota Crown Comfort (XS10) comes with a ride height or ground clearance of 165 mm (6.5 inches). This clearance is adequate for typical urban roads, allowing the car to comfortably handle speed bumps, minor road irregularities, and potholes without frequent scraping. While it's not designed for off-road use, the ground clearance supports smooth daily driving in city and suburban environments, balancing stability and practical usability.

Yes, the Toyota Crown Comfort (XS10) generally fits into a standard residential garage. With a width of 1695 mm (66.7 inches) and length of 4695 mm (184.8 inches), it is within typical garage size limits. Most standard garage spaces accommodate vehicles up to about 2.5 meters (98 inches) wide and 6 meters (236 inches) long, so the Crown Comfort's dimensions ensure easy parking without difficulty. However, it’s always best to check specific garage dimensions before assuming a perfect fit.

Compared to the predecessor generation of the Toyota Crown Comfort, the XS10 model maintained similar dimensions, with slight refinements for enhanced comfort and aerodynamics. The length at 4695 mm (184.8 inches) was consistent, but some models saw marginal improvements in height and width to accommodate passenger space and modern styling. These changes contributed to a more comfortable ride and improved driver visibility, while preserving the practical size that made the Crown Comfort a favorite for corporate and taxi use.

The Toyota Crown Comfort (XS10) is somewhat larger than many compact sedans but smaller than full-size luxury sedans. With its length of 4695 mm (184.8 inches) and width of 1695 mm (66.7 inches), it fits comfortably within the mid-size sedan category. Similar vehicles like the Nissan Cedric or the Mitsubishi Galant from the same era have comparable lengths but may differ in width or height. The Crown Comfort's size makes it ideal for city taxi services, balancing passenger comfort without being too bulky for urban driving.

Despite a relatively moderate exterior size of 4695 mm (184.8 inches) in length and 1695 mm (66.7 inches) in width, the Toyota Crown Comfort (XS10) boasts a spacious and practical interior layout. Designed primarily as a taxi and fleet vehicle, it offers roomy seating for up to five passengers with ample legroom and headroom, thanks to its efficient use of cabin space. The height of 1515 mm (59.6 inches) allows for comfortable seating posture, and the flat rear floor and straightforward interior design maximize passenger comfort.

The Toyota Crown Comfort (XS10)'s curb weight between 1280 kg and 1340 kg (2822 to 2954 lbs) and its moderate size contribute positively to its fuel efficiency. Being relatively light for a mid-size sedan of its era, it demands less energy for acceleration and maintaining cruising speeds. Its dimensions allow for efficient aerodynamics in city driving conditions, which are typical for its usage. Consequently, it offers decent fuel economy in urban stop-and-go traffic, an important factor for taxi operators focusing on cost-effective daily operation.

The Toyota Crown Comfort (XS10) was produced from 1995 to 1999. During this period, it was primarily manufactured as a taxi and fleet vehicle, especially popular in Japan, Hong Kong, Singapore, and other Asian markets. Its design emphasized durability, ease of maintenance, and passenger comfort, making it a favorite among taxi operators. The XS10 generation also focused on reliability and practical size for urban environments, reinforcing its role as a dependable workhorse in public transportation.

The Toyota Crown Comfort (XS10) features a straightforward, functional design tailored to its role as a taxi and fleet vehicle. Unlike many contemporary sedans that emphasized sportiness or luxury, the Crown Comfort prioritized interior space, ease of entry/exit with wide door openings, and durable materials suited for heavy, repetitive use. Its boxy yet aerodynamic shape maximized passenger comfort and visibility. Additionally, the vehicle's reliable mechanical parts and robust suspension system made it easier to maintain and durable for daily urban driving.