1970 Toyota Corolla II 4-door sedan (E20) Dimensions, Size & Specs

The curb weight of the 1970 Toyota Corolla II 4-door sedan (E20) ranges from 750 kg to 790 kg (1653 lbs to 1742 lbs). This lightweight build enhances fuel efficiency and makes the car nimble in urban driving conditions. The lower weight contributes to better acceleration and easier handling, especially given the compact size of the vehicle. This curb weight was typical of compact cars in the early 1970s, focusing on simplicity and cost-effective construction. The reduced weight also meant less strain on the engine and improved overall vehicle economy.

At 1375 mm (54.1 inches) in height, the 1970 Toyota Corolla II 4-door sedan (E20) is relatively low-profile compared to many sedans of its time, which often had heights exceeding 1400 mm (55 inches). This height aids in reducing aerodynamic drag, improving fuel economy, and lending the vehicle a sportier stance. The lower roofline may slightly impact headroom inside the cabin, but it strikes a good balance between comfort and exterior dimensions. Its compact and low design also helped with stability during turns and wind resistance on highways.

Yes, the 1970 Toyota Corolla II 4-door sedan (E20) is well-suited for fitting into a standard garage. With a length of 3945 mm (155.3 inches or roughly 13 feet), width of 1505 mm (59.3 inches or about 4.9 feet), and height of 1375 mm (54.1 inches or roughly 4.5 feet), it comfortably fits within typical residential garages, which usually accommodate vehicles up to about 6 meters (20 feet) in length and 2.5 meters (8 feet) in width. Its compact size especially benefits owners with limited parking space, such as urban dwellers, ensuring easy entry, exit, and protection from weather and theft.

The Toyota Corolla II E20 has a width of 1505 mm (59.3 inches). Compared to its predecessor, the E10 generation Corolla – which was slightly narrower, the E20's marginally increased width allowed for slightly more interior comfort and shoulder room for passengers. This improved cabin width helped enhance passenger comfort within a compact exterior footprint, maintaining the Corolla’s reputation for practicality. Despite being a compact sedan, the design optimizes the available space efficiently but remains narrow compared to modern sedans, reflecting the typical compact car dimensions of the early 1970s.

Dimensionally, the 1970 Toyota Corolla II 4-door sedan holds its own among compact sedans of the early 1970s. With a length of 3945 mm (155.3 inches), width of 1505 mm (59.3 inches), and height of 1375 mm (54.1 inches), it was somewhat smaller and lighter than many Western competitors such as the Ford Escort Mk1 or Volkswagen Beetle. This slightly smaller size contributed to better fuel efficiency and easier handling in urban environments. The Corolla II offered a practical size that prioritized economy without sacrificing essential passenger space, which made it competitive and appealing in its market segment.

Exact interior dimensions for the 1970 Toyota Corolla II 4-door sedan (E20) are not widely documented, but given its exterior dimensions—length 3945 mm (155.3 inches), width 1505 mm (59.3 inches), and height 1375 mm (54.1 inches)—the cabin is compact but efficiently designed. Typically, compact sedans of this size provided comfortable seating for four to five passengers, with adequate legroom for front occupants and slightly more constrained space in the rear, especially in shoulder width due to the narrow body. Headroom might be moderate owing to the low roofline, but overall the interior was functional and practical for its class.

The Toyota Corolla II (E20), produced from 1970 to 1974, represented a significant evolution over its predecessor, the E10. Dimensionally, the E20 became slightly larger and more refined in overall design, with a longer body (3945 mm compared to the E10's approximately 3870 mm) and a slightly wider stance at 1505 mm. The design focused on improved aerodynamics, comfort, and visibility, featuring cleaner, more modern styling lines. Mechanically, the E20 also introduced enhanced engine options and higher build quality. These changes improved ride comfort and road handling, making it a more mature and appealing model in the compact sedan segment.

The Toyota Corolla II 4-door sedan (E20) was highly competitive when compared to other compact sedans of the 1970s, such as the Datsun Bluebird, Ford Escort, and Volkswagen Beetle. Dimensionally more compact with a length of 3945 mm (155.3 inches) and narrow width of 1505 mm (59.3 inches), it positioned itself as a practical and economical choice. Its lightweight construction, ranging from 750 to 790 kg (1653 to 1742 lbs), contributed to excellent fuel efficiency and agility. Toyota's reputation for reliability, combined with efficient packaging and modest size, often gave it an edge over slightly larger or heavier rivals in terms of cost of ownership and ease of parking.

The compact dimensions of the 1970 Toyota Corolla II (E20) significantly contributed to its popularity, especially in urban markets where parking space and maneuverability were key concerns. At just 3945 mm (155.3 inches) long, 1505 mm (59.3 inches) wide, and 1375 mm (54.1 inches) tall, it was easy to handle and park in tight city environments. Its lightweight curb weight, between 750 and 790 kg (1653 to 1742 lbs), further enhanced fuel economy and reduced operating costs. These factors combined with Toyota's growing global reputation for reliability helped the Corolla II become a sought-after compact sedan during the early 1970s.