2012 Subaru BRZ I Dimensions, Size & Specs

The curb weight of the Subaru BRZ I ranges between 1202 kg to 1262 kg (2650 lbs to 2784 lbs). This relatively light weight, combined with the car’s balanced chassis and rear-wheel-drive layout, enhances its agility and responsiveness. The light curb weight helps improve acceleration, braking efficiency, and cornering performance, qualities that are integral to the driving pleasure the BRZ offers.

The Subaru BRZ I features a luggage capacity of 243 liters (about 8.6 cubic feet). While this is modest compared to larger cars or SUVs, it is fairly typical for a compact sports coupe. This space can accommodate a couple of small suitcases or grocery bags, making it adequate for day-to-day errands or weekend trips rather than extensive luggage needs.

The Subaru BRZ I comes with rim sizes of 6.5J x 16 and 7J x 17, depending on the trim level, fitted with tires sized 205/55 R16 and 215/45 R17, respectively. These wheel and tire configurations are optimized for a balance of ride comfort, traction, and precise handling, enhancing the car’s sporty character while maintaining daily drivability.

Yes, the Subaru BRZ I's compact dimensions (4240 mm length, 1775 mm width, and 1425 mm height) make it well-suited to fit comfortably in a standard residential garage. Most single-car garages have a width of approximately 2400 to 2700 mm (94.5 to 106 inches) and a length of about 4800 mm (189 inches), so the BRZ easily fits with room to spare for doors opening and storage.

The Subaru BRZ I (2012-2016) was a fresh introduction and did not have a direct predecessor under the BRZ name, as it debuted as part of a collaboration with Toyota that led to the Toyota GT86/Scion FR-S. Compared to older Subaru sports models, the BRZ offered a more focused, lightweight, and agile sports coupe. Its dimensions embody a design targeted toward nimble performance and driving fun rather than size or utility.

When compared to similar sports coupes such as the Toyota GT86/Scion FR-S, the Subaru BRZ I shares nearly identical dimensions and weight, as the models were jointly developed. Compared to competitors like the Mazda MX-5 Miata, the BRZ is longer (4240 mm vs approximately 3915 mm) and wider (1775 mm vs around 1735 mm), with a higher curb weight (1202-1262 kg vs roughly 1050-1150 kg), reflecting its coupe configuration and slightly more powerful engine setup.

The BRZ I’s compact footprint, with a length of 4240 mm and width of 1775 mm, is advantageous in urban environments and spirited driving scenarios. This size allows for easier maneuvering through traffic and tight corners, as well as simplified parking in confined spaces. Its relatively low height (1425 mm) also lowers the center of gravity, improving stability and handling.

Although the BRZ I is designed as a compact sports coupe, its dimensions allow for a driver-focused interior with adequate front seating comfort. The lower height and coupe roofline limit rear passenger headroom and legroom, so rear seats are better suited for short trips or small passengers. The focus is on a sporty, engaging driving experience rather than spacious rear accommodations.

The curb weight of the Subaru BRZ I varies from about 1202 kg to 1262 kg (2650 to 2784 lbs) depending on factors such as trim levels, optional equipment, and regional specifications. Differences in wheel size, added features like navigation or upgraded audio, and transmission choice (manual vs automatic) can all influence the vehicle's weight. These variations can slightly affect performance and fuel efficiency.