2001 SsangYong Rexton I Dimensions, Size & Specs

The width of the SsangYong Rexton I remains consistent at 1870 mm (about 73.6 inches), which offers sufficient shoulder room for passengers and stable handling on the road. The height varies between 1760 mm and 1830 mm (approximately 69.3 to 72 inches). This height range reflects differences in suspension setups or optional roof equipment during its production from 2001 to 2006.

The curb weight of the Rexton I ranges between 1815 kg and 2023 kg (around 4005 to 4460 pounds). This weight influences fuel consumption, acceleration, and overall handling. Heavier versions tend to offer enhanced stability and ride comfort but may have slightly reduced fuel efficiency compared to lighter variants.

The maximum authorized weight varies between 2550 kg and 2805 kg (approximately 5620 to 6185 pounds). This includes the vehicle's curb weight plus passengers, cargo, and optional equipment. Knowing this limit is crucial for safely loading the SUV, especially during off-road excursions or towing activities.

With the rear seats in place, the luggage capacity is between 500 liters and 935 liters (about 17.7 to 33 cubic feet), which offers decent space for everyday items and some luggage. Folding down the rear seats significantly increases this to a range between 1524 liters and 1920 liters (approximately 53.8 to 67.8 cubic feet), making it very practical for transporting larger loads or bulky equipment.

Standard residential garages typically offer interior dimensions of about 2400 mm width by 4800 mm depth (94.5 inches by 189 inches). Given the Rexton I’s width of 1870 mm (73.6 inches) and maximum length of 4785 mm (188.4 inches), it fits snugly but comfortably inside a standard garage. The vehicle’s height of up to 1830 mm (72 inches) also accommodates most single-car garage heights, though roof racks or additional rooftop accessories may need checking for clearance.

The SsangYong Rexton I was actually the brand's first generation of the Rexton model launched in 2001, so it does not have a direct predecessor model under the same name. However, it built upon SsangYong's prior SUVs by offering increased interior space, refined design, and improved dimensions that were generally larger and more suited for modern standards in the early 2000s. Its size placed it firmly in the mid-size SUV category, appealing to families and customers seeking off-road capability.

In the early 2000s, mid-size SUVs like the Toyota Land Cruiser Prado, Mitsubishi Pajero, and Nissan Pathfinder had similar dimensional ranges. The Rexton I's length of about 4720-4785 mm (185.8-188.4 inches), width of 1870 mm (73.6 inches), and height up to 1830 mm (72 inches) place it competitively within this segment. Its luggage capacity, especially with folded rear seats, was favorable, offering versatility compared to some rivals. However, in terms of curb weight, it sometimes leaned heavier, reflecting solid build quality and ruggedness.

The Rexton I was equipped with rim sizes ranging from 6.5J x 16 to 8J x 16, paired with tire sizes mainly 235/70 R16 and 255/65 R16. These setups contribute to a balanced ride quality, giving good ground clearance, off-road capability, and a comfortable on-road driving experience. The tire width provides adequate grip for both wet and dry conditions, while the 16-inch wheel diameter balances between handling agility and cushioning impacts from rough surfaces.

The SsangYong Rexton I supports a roof load capacity of up to 80 kg (approximately 176 lbs). This allows for the installation of roof racks, cargo boxes, or carrying equipment like bikes or kayaks, but users should always ensure the load is evenly distributed and secured properly. Adhering to this maximum roof load rating is important for vehicle stability, safety, and to prevent damage to the roof structure.