2017 SCG 003S Concept Dimensions, Size & Specs

The SCG 003S Concept has a curb weight of approximately 1300 kg (2866 pounds). This relatively lightweight figure for a high-performance coupe contributes significantly to its agility, acceleration, and braking efficiency. The weight optimization helps enhance the car's power-to-weight ratio, critical for prototype sports cars aiming to achieve track-ready performance. The low curb weight complements the aerodynamic design and advanced materials likely used in the construction, allowing for quicker response times and improved fuel efficiency compared to heavier counterparts.

While the exact height of the SCG 003S Concept is not specified, prototype and track-focused coupes like this typically feature a low height profile ranging between approximately 1100 mm to 1200 mm (43 to 47 inches). A low height enhances the vehicle's center of gravity, substantially improving cornering stability, reducing body roll, and increasing aerodynamic efficiency. This trait is beneficial for performance driving, allowing drivers to extract higher levels of grip and responsiveness, which the SCG 003S Concept likely embodies given its purpose as a high-performance coupe.

The SCG 003S Concept, with dimensions of 4733 mm (186.3 inches) in length and 1995 mm (78.5 inches) in width, can fit into a standard residential garage, but with limited clearances. Typical garage sizes in many countries are roughly 2440 mm (8 feet) wide and 5330 mm (17.5 feet) deep. While the length fits comfortably, the width is close to the standard garage door width, which often ranges from 2130 mm (84 inches) to 2440 mm (96 inches). Owners should carefully measure their garage’s door width and interior space to ensure safe and practical access without risk of scratching or difficulty maneuvering.

The SCG 003S Concept is a unique and advanced evolution in SCG's lineup, particularly when compared to previous models such as the SCG 004 series or earlier track-focused vehicles. The 003S stands out due to its longer length of 4733 mm (186.3 inches) and wide stance at 1995 mm (78.5 inches), which generally exceeds the dimensions of earlier generations that were often more compact and focused on lightweight agility. This growth in size reflects SCG's intention to blend extreme performance with greater aerodynamic efficiency and stability, differentiating the 003S from its predecessors by offering a more substantial presence while maintaining competitive weight figures at 1300 kg (2866 lbs).

Compared to similar high-performance sports coupes like the Lamborghini Huracán or Ferrari 488 GTB, the SCG 003S Concept is comparable in length and width but stands out by maintaining a relatively lower curb weight of 1300 kg (2866 pounds). For instance, the Lamborghini Huracán is approximately 4459 mm (175.6 inches) long and weighs around 1422 kg (3135 lbs), while the Ferrari 488 GTB measures about 4564 mm (179.6 inches) in length with a curb weight near 1475 kg (3252 lbs). The SCG 003S’s wider stance at 1995 mm (78.5 inches) also contributes to its enhanced cornering ability, making it a competitive proposition within the niche of track-focused supercars.

As a prototype coupe designed primarily for high performance and aerodynamics, the SCG 003S Concept typically provides a focused interior space primarily for two occupants. Given its emphasis on lightweight construction and race-inspired features, the interior likely prioritizes driver engagement and minimalism rather than spacious comfort. Passenger capacity is thus limited to two seats, with materials and design elements aimed at reducing weight and improving driver ergonomics rather than increasing cabin volume or luxury accommodations.

Although the exact ground clearance of the SCG 003S Concept is not specified, performance-oriented coupes and prototypes typically feature low ground clearance, often around 100 mm to 120 mm (4 to 4.7 inches). This low clearance is intentionally designed to enhance stability at high speeds, improve aerodynamics, and lower the center of gravity. However, this can affect everyday drivability by limiting the vehicle's ability to handle uneven road surfaces or speed bumps without clearance issues. Owners should thus expect that while the SCG 003S excels on smooth tracks and roads, caution is needed when navigating rough terrain or urban obstacles.

Specific front and rear track widths for the SCG 003S Concept are not provided publicly, but considering its total width of 1995 mm (78.5 inches), the track width is likely quite substantial. A wider track width improves stability and handling, especially during high-speed cornering, by increasing lateral support. This is a critical design feature for a prototype model like the SCG 003S, as it ensures that the car maintains grip and balance during aggressive driving. The wide track combined with the car's low weight and aerodynamic profile allows for impressive agility and control.

The SCG 003S Concept is an evolution of SCG's 003 model lineage, designed to enhance aerodynamic efficiency and performance. While specific height figures for both generations are limited, the 003S likely features a slightly lower and more streamlined profile than the original SCG 003 to reduce drag and lower the center of gravity. This profile refinement improves high-speed stability and cornering performance. The increased width and targeted weight reductions further differentiate the 003S from its predecessor by emphasizing sharper handling dynamics and track readiness, continuing SCG’s philosophy of blending road-legal usability with race-inspired engineering.