2013 RAM 2500/3500 Crew Cab I (facelift 2013) Dimensions, Size & Specs

When the RAM 2500/3500 Crew Cab I (facelift 2013) has its side mirrors opened, the total width measures approximately 2009 mm (79.1 inches). This width includes the extended mirrors which are necessary for enhanced visibility, especially when towing or carrying wide loads. Drivers should be mindful of this width when parking or navigating narrow spaces, ensuring sufficient clearance on either side.

The height of the RAM 2500/3500 Crew Cab I (facelift 2013) ranges from 1872 mm (73.7 inches) to 2057 mm (81.0 inches). This variation depends on factors such as ride height options, suspension setup, and tire sizes, especially considering some models may have off-road packages or lifted suspensions. The higher configurations provide greater ground clearance, beneficial for off-road use, while the lower height variants might be optimized for aerodynamics and easier access.

The RAM 2500/3500 Crew Cab I (facelift 2013) features a curb weight (the weight of the truck without passengers or cargo) ranging from 2663 kg (5876 lbs) to 3481 kg (7673 lbs). Its maximum gross weight, which includes passengers, cargo, and the vehicle's own weight, ranges from 3860 kg (8510 lbs) up to 5307 kg (11700 lbs). This significant weight range attests to the heavy-duty nature of these trucks, suitable for demanding towing and payload tasks.

With the rear seats folded down, the RAM 2500/3500 Crew Cab I offers a luggage capacity of approximately 1628 liters (about 57.5 cubic feet). This space allows for transporting large items inside the cab, which is especially useful when inclement weather prevents hauling in the truck bed or when additional secure storage is required. This capacity maximizes utility for both work and recreational purposes.

The RAM 2500/3500 Crew Cab I (facelift 2013) provides a ground clearance of 363 mm (14.3 inches). This high ride height improves the truck's ability to drive over rough terrain without damaging the undercarriage. It is a critical feature for off-road enthusiasts and users requiring rugged performance, allowing better approach, departure angles, and obstacle clearance, which enhances overall capability on challenging surfaces.

Fitting a RAM 2500/3500 Crew Cab I (facelift 2013) into a standard residential garage can be challenging due to its dimensions. With a width of around 2009 mm (79.1 inches) including mirrors and height up to 2057 mm (81.0 inches), it can be a tight fit, especially in garages with low ceilings or narrow door widths. Standard garage door widths generally range from 2400 mm (about 94.5 inches) to 2700 mm (106 inches), so lengthwise the truck will fit since it is about 6030 mm (237.4 inches) long, but maneuvering inside might require care. Owners with limited garage space often need to measure their garage dimensions carefully before parking such a large vehicle indoors.

Compared to its predecessor, the pre-facelift RAM 2500/3500 Crew Cab I which ran before 2013, the facelifted 2013-2018 model maintained similar overall dimensions in terms of length and width but introduced subtle changes such as changes in height due to suspension and trim packages. Length remained in the range of about 6 meters (approximately 20 feet), while width with mirrors extended stays around 2 meters. The updated model also featured improved aerodynamic styling and suspension tuning, which slightly affected overall height and ride comfort without significantly altering the truck’s footprint. These evolutionary dimensional traits ensure compatibility with existing garages and parking setups, while also providing modernized styling and utility.

The RAM 2500/3500 Crew Cab I (facelift 2013) is competitive with other heavy-duty pickups such as the Ford F-250/F-350 and Chevrolet Silverado 2500HD/3500HD. Dimensionally, it aligns closely in length around 6 meters (about 20 feet) and width nearing 2 meters (79 inches with mirrors). Ground clearance at 363 mm (14.3 inches) is comparable or slightly better depending on trims. Its cargo capacity and max weight rating also place it among the heavy-duty segment leaders. While the RAM is known for integrating advanced suspension technologies providing improved ride comfort, its size and weight figures are typical for trucks designed for both work and towing capacity. Buyers often choose between these trucks based on brand preference, diesel engine options, and specific cab/bed configurations rather than size disparity alone.

The RAM 2500/3500 Crew Cab I (facelift 2013) offers various rim sizes including 8J x 18 ET43, 8J x 20 ET55, 7.5J x 17 ET57, and 8J x 17 ET42, accommodating different tire configurations. Tire sizes include options such as 275/70 R18 118T, 285/60 R20 115H, 245/70 R17 116S, 265/70 R17 118S, 285/60 R20 115T, and 265/70 R17 118. These combinations allow owners to tailor their trucks toward improved off-road performance, towing capacity, or comfort, depending on their usage needs and aesthetic preferences.