2008 Peugeot Bipper Tepee Dimensions, Size & Specs

The Peugeot Bipper Tepee has a curb weight ranging between 1165 kg and 1185 kg (2568 to 2612 lbs), which contributes to its agility and fuel efficiency in the compact minivan segment. The relatively light curb weight allows for better fuel economy and easier handling in city driving conditions. It can support a maximum weight between 1680 kg and 1700 kg (3704 to 3748 lbs), accounting for passengers, cargo, and additional equipment. This maximum weight capacity ensures that the vehicle can safely carry a considerable load, including family, luggage, or commercial goods, without compromising structural integrity or performance. The balance between curb and maximum weight enables the Bipper Tepee to perform reliably with good stability while loaded.

The Peugeot Bipper Tepee offers practical luggage space that caters well to families and small businesses. With the rear seats in the upright position, it provides a luggage capacity of 356 liters (approximately 12.6 cubic feet), which is adequate for everyday shopping or small luggage loads. When more cargo space is needed, folding down the rear seats expands the luggage compartment dramatically to 884 liters (about 31.2 cubic feet). This flexible capacity makes the Bipper Tepee highly versatile, allowing users to carry bulkier items or complete loads comfortably, turning it from a passenger-focused vehicle into a handy cargo transporter.

Yes, the Peugeot Bipper Tepee fits comfortably into a standard garage. With a length of 3959 mm (156.0 inches), width of 1816 mm (71.5 inches), and height of 1721 mm (67.8 inches), it remains within typical garage size limits. Standard single-car garages typically measure about 6 meters (20 feet) in length and 3 meters (10 feet) in width, which provides ample space for the Bipper Tepee with room to open doors and maneuver around the vehicle. Its manageable dimensions make it practical for urban homeowners who rely on garage parking, as well as those concerned about indoor storage protection.

The Peugeot Bipper Tepee comes equipped with 15-inch rims paired with 185/65 R15 tires. This wheel and tire size strikes a balance between comfort, handling, and cost efficiency. The 15-inch rims are sufficiently large to provide stable cornering and road grip, while the 65 aspect ratio tire sidewall height ensures a cushioned ride by absorbing bumps and road imperfections effectively. The tire width of 185 mm (about 7.3 inches) offers reliable traction without compromising fuel economy, making this setup ideal for urban and suburban driving conditions as well as light cargo transport.

The interior of the Peugeot Bipper Tepee is thoughtfully designed to accommodate both family and small commercial needs. Thanks to its compact yet tall body design with a height of 1721 mm (67.8 inches), passengers benefit from generous headroom and an airy cabin atmosphere. The minivan layout typically offers flexible seating arrangements, allowing for up to five occupants comfortably. The rear seats fold down to increase cargo space significantly, making it suitable for transporting luggage, equipment, or goods. Its footprint and configurable interior make the Bipper Tepee a practical choice for users who require a blend of passenger comfort and versatile cargo capacity.

The Peugeot Bipper Tepee, introduced in 2008, essentially marked a new generation of the Bipper model with enhanced versatility and refined styling. Compared to its predecessor, the Bipper Tepee retained roughly the same compact footprint but offered improved interior arrangements and increased luggage capacity, especially with seats folded down (up to 884 liters or 31.2 cubic feet). The height and width were optimized to maximize interior space while maintaining excellent maneuverability. Functionally, it transitioned towards a more passenger-friendly minivan configuration, broadening the model's appeal to families and small businesses, whereas earlier versions were more focused on basic commercial utility.

In comparison to other small minivans like the Citroën Nemo Combi and Fiat Fiorino Qubo, the Peugeot Bipper Tepee is very competitive in terms of size and capacity. Its length of 3959 mm (156.0 inches) and width of 1816 mm (71.5 inches) keep it compact yet spacious enough for urban driving and parking. Luggage capacity of 356 liters (12.6 cubic feet) with seats up and 884 liters (31.2 cubic feet) with seats folded is comparable to peers, offering sufficient utility for everyday or light commercial use. The Bipper Tepee distinguishes itself with a slightly higher roofline affording better headroom and a comfortable cabin environment, positioning it well for users seeking practicality without bulk.

The compact dimensions of the Peugeot Bipper Tepee provide several key advantages for city driving and tight parking situations. Its length of just under 4 meters (3959 mm or 156.0 inches) enables easy maneuvering through narrow urban streets and busy traffic, which is especially valuable in crowded European cities. The moderate width of 1816 mm (71.5 inches) allows the vehicle to fit comfortably into standard parking bays while still offering a roomy interior. The height of 1721 mm (67.8 inches) enhances visibility for the driver and increases passenger comfort without compromising garage compatibility. Together, these features make the Bipper Tepee a highly practical choice for city dwellers needing a versatile minivan.

With a curb weight between 1165 kg and 1185 kg (2568 to 2612 lbs), the Peugeot Bipper Tepee is relatively lightweight for a minivan, which positively influences fuel efficiency and driving dynamics. The lighter weight means that the engine expends less effort to move the vehicle, contributing to better fuel consumption figures, especially important in stop-and-go urban driving where the Bipper Tepee often operates. This curb weight also enhances agility and response, making the vehicle easier to handle and less cumbersome compared to heavier competitors. Additionally, the maximum weight capacity of up to 1700 kg (3748 lbs) ensures the vehicle remains stable and safe even when fully loaded, maintaining balance between efficiency and functionality.