1994 Peugeot 306 Cabrio (7D) Dimensions, Size & Specs

The curb weight of the Peugeot 306 Cabrio (7D) ranges from 1200 to 1260 kg (2646 to 2778 lbs) depending on specific trim and equipment. The maximum allowed weight (gross vehicle weight) ranges from 1550 to 1610 kg (3417 to 3548 lbs). This means it can safely carry passengers and cargo up to these weight limits without compromising safety or handling.

The Peugeot 306 Cabrio (7D) provides a luggage capacity of 274 liters (approximately 9.67 cubic feet). While convertible cars typically lose some trunk volume compared to their hatchback counterparts due to the folding roof mechanism, the 306 Cabrio still offers a reasonably practical cargo space for daily use or weekend trips, balancing open-air fun with utility.

The Peugeot 306 Cabrio (7D) is equipped with 14-inch rims as standard. It supports tire sizes of 185/65 R14, 185/60 R14, and 185/55 R15. These tire dimensions ensure a good balance between comfort, handling, and grip, typical for a small convertible designed for mixed urban and leisure driving.

Yes, the Peugeot 306 Cabrio (7D) fits comfortably into a standard single-car garage. With a length of 4144 mm (163.1 inches) and a width of 1689 mm (66.5 inches), it is smaller than the average garage dimensions which are generally around 6 meters (20 feet) in length and 3 meters (10 feet) in width. Its compact size allows ample space for opening doors and maneuvering within typical residential garages.

Comparing the Peugeot 306 Cabrio (7D) with its predecessor, the Peugeot 305 Cabrio, the 306 Cabrio exhibits a more modern and slightly larger footprint. The 306 Cabrio measures 4144 mm in length and 1689 mm in width, providing a more streamlined and compact design compared to the older 305 cabriolet, which was longer and wider but bulkier. This evolution reflects Peugeot's move towards a more sport-oriented and lightweight convertible, enhancing agility and aesthetic appeal.

The Peugeot 306 Cabrio (7D) stands competitively among compact convertibles of the mid-1990s. With dimensions of 4144 mm length, 1689 mm width, and 1356 mm height, it is similar in size to rivals like the Volkswagen Golf Cabriolet and the BMW E30 Cabriolet. Its luggage capacity of 274 liters is practical for daily use and light travel, offering a good balance between open-air enjoyment and everyday usability. The 306's relatively low curb weight enhances its dynamic handling, making it a sportier choice compared to some bulkier convertibles of the time.

The Peugeot 306 Cabrio (7D) measures 1356 mm (53.4 inches) in height, giving it a low, sporty profile typical of convertibles designed for an engaging driving experience. The low height helps reduce aerodynamic drag and improves stability at speed. While exact ground clearance figures aren't specified here, the car’s low stance generally provides sufficient clearance for urban and highway driving but requires caution on rougher surfaces to avoid scraping the underbody.

The Peugeot 306 Cabrio (7D) has a curb weight ranging from 1200 to 1260 kg (2646 to 2778 lbs), which is typically heavier than the equivalent hatchback variants of the Peugeot 306. This extra weight is mostly due to the reinforced chassis and mechanisms required to maintain structural integrity without a fixed roof. Despite this, the Cabrio remains agile and well-balanced for a convertible, offering a sportier feel while maintaining practical everyday usability.

The standard rim size for the Peugeot 306 Cabrio (7D) is 14 inches. The vehicle supports tires sized 185/65 R14, 185/60 R14, and 185/55 R15, showing that it can accommodate slightly larger rims in the 15-inch range. However, fitting larger rims, such as 15-inch or beyond, should be done carefully, considering suspension tuning and tire profile to avoid negatively impacting ride comfort, handling dynamics, and speedometer accuracy.