2017 Perodua Axia I (B200, facelift 2017) Dimensions, Size & Specs

The curb weight of the Perodua Axia I (B200, facelift 2017) ranges between 820 kg to 840 kg (approximately 1808 to 1852 lbs). This relatively light weight contributes to its fuel efficiency, agile handling, and ease of maneuverability, especially in city traffic. The light curb weight also helps optimize the small engine's performance, aiding in low fuel consumption and minimizing emissions.

This generation of Perodua Axia is equipped with 14-inch rims, fitted with tires sized 175/65 R14. The tire size indicates a tire width of 175 mm, an aspect ratio (profile) of 65%, and a 14-inch rim diameter. This setup balances ride comfort, grip, and cost efficiency, suitable for the lightweight hatchback’s design and typical urban-use conditions.

Yes, the Perodua Axia I (B200, facelift 2017) easily fits into a standard garage. With a length of 3640 mm (around 3.64 meters or 11.9 feet), width of 1620 mm (1.62 meters or 5.3 feet), and height of 1510 mm (1.51 meters or 4.96 feet), it's compact enough to comfortably fit into typical residential garages, which generally accommodate much larger vehicles.

Despite its compact exterior dimensions, the Perodua Axia I (B200, facelift 2017) offers efficient space utilization inside. The hatchback layout maximizes usable cabin and cargo area, providing comfortable seating for four to five occupants. Its height of 1510 mm (59.4 inches) ensures reasonable headroom, while the clever design offers adequate knee and shoulder space, making it practical for daily commuting and small families.

The Perodua Axia I (B200) facelift released in 2017 retained largely the same compact footprint as the original Axia introduced in 2014. Both generations have similar dimensions with a length around 3640 mm (143.3 inches), width near 1620 mm (63.8 inches), and height roughly 1510 mm (59.4 inches). The facelift primarily focused on aesthetic and feature improvements rather than significant changes in size, maintaining the car's appeal as an affordable and practical urban hatchback.

Compared to similar compact hatchbacks like the Suzuki Celerio or Honda Brio, the Perodua Axia I (B200, facelift 2017) holds its ground with a slightly smaller footprint. With a length of 3640 mm (143.3 inches), it is often a bit shorter than these rivals, making it ideal for tight city environments and easier parking. The width of 1620 mm (63.8 inches) is competitive, providing a balanced mix of maneuverability and cabin space. Its light weight further improves nimbleness compared to competitors.

As a hatchback, the Perodua Axia I (B200, facelift 2017) offers exceptional versatility despite its compact size. The rear hatch door enables easy access to the cargo area, making loading and unloading groceries, luggage, or gear more convenient. Additionally, folding rear seats significantly increase usable cargo space, a benefit not as readily available in sedan counterparts. Its small footprint combined with the hatchback configuration allows drivers to enjoy both good maneuverability and practical cargo solutions.

The 2017 facelift of the Perodua Axia I (B200) introduced refreshed exterior styling such as redesigned headlights, updated bumpers, and grille enhancements; however, these changes did not alter the fundamental dimensions of the car. The length remained at 3640 mm (143.3 inches), width at 1620 mm (63.8 inches), and height at 1510 mm (59.4 inches). The updates focused on aesthetics and technology rather than size or structural changes, preserving its compact and efficient urban-friendly dimensions.

Yes, the Perodua Axia I (B200, facelift 2017) is well-suited for urban driving due to its compact dimensions; at 3640 mm (143.3 inches) long, 1620 mm (63.8 inches) wide, and weighing between 820-840 kg (1808-1852 lbs), it offers excellent maneuverability in traffic and easy parking in tight spots. Its small turning radius and lightweight frame enhance agility, making it a practical choice for city commuters who need an efficient, space-conscious vehicle.