1996 Mitsuoka Galue I Dimensions, Size & Specs

The Mitsuoka Galue I comes with tire sizes 185/70 R14 and 195/65 R15. These tire dimensions indicate a balance between comfort and stability, with the higher sidewall typical of the 14-inch tire providing a cushier ride, while the 15-inch tires offer slightly better handling and road grip. Such sizes support a smooth and controlled driving experience, fitting well with its sedan characteristics that favor comfort and elegance over sportiness.

With a height of 1450 mm (57.1 inches), the Mitsuoka Galue I stands at a moderate height for sedans from the late 1990s and early 2000s. This height provides a good balance between headroom and aerodynamic profile, making the car practical for interior comfort while maintaining a classic, slightly stately silhouette inspired by vintage styling cues.

The width of the Mitsuoka Galue I is 1730 mm (68.1 inches), which gives it adequate on-road stability and sufficient interior shoulder room. A wider vehicle generally improves lateral stability, especially during cornering, and the Galue I’s width aligns well with other sedans of its time, enabling it to offer a spacious cabin for driver and passengers alike without being too wide for urban driving and parking.

Yes, the Mitsuoka Galue I is likely to fit within a standard residential garage. Typical single-car garages have widths around 2400 to 2700 mm (94.5 to 106 inches) and lengths of approximately 4800 to 6000 mm (189 to 236 inches). Given the Galue I’s dimensions of 4860 mm (length) by 1730 mm (width), it fits comfortably within these limits, though drivers should always measure their specific garage to ensure adequate clearance for opening doors and maneuvering.

The Mitsuoka Galue I is the first generation and therefore does not have a predecessor to compare dimensions with. This generation set the baseline for Mitsuoka’s Galue series with its distinct classic-inspired styling married to modern sedan proportions. Subsequent generations, if any, would evolve from this original design and size template.

The Mitsuoka Galue I’s dimensions of approximately 4860 mm (191.3 in) in length, 1730 mm (68.1 in) in width, and 1450 mm (57.1 in) in height place it firmly in the mid to full-size sedan category, comparable to cars like the Toyota Crown or Nissan Cefiro of the time. However, Mitsuoka combined these dimensions with a retro, luxury-inspired exterior design, setting it apart in the niche market of uniquely styled sedans inspired by classic British cars, rather than just competing directly on pure size or performance.

While the exact weight for the Mitsuoka Galue I isn't specified here, cars of similar size and construction from this era typically weigh between 1,400 to 1,600 kg (3,086 to 3,527 lbs). Its weight contributes to a stable and comfortable ride, with enough mass to absorb road imperfections while still enabling manageable handling for a sedan focused more on comfort and style than sporty performance.

Given the Galue I’s fairly long length of 4860 mm (191.3 inches) and width of 1730 mm (68.1 inches), its interior is expected to offer good legroom and shoulder room for both front and rear passengers. The classic retro design may slightly reduce trunk space or internal packaging efficiency compared to more modern sedans, but overall, the cabin should feel roomy and comfortable, suitable for long drives with up to five occupants.

The Mitsuoka Galue I stands out from typical sedans of the late 1990s and early 2000s primarily due to its distinct retro-inspired styling. It features classic British luxury car elements such as rounded fenders, chrome accents, and a long hood, offering a blend of modern sedan practicality with vintage elegance. This nostalgic design appeals to buyers looking for a unique and luxurious alternative to mainstream sedans.