1991 Mazda Sentia (HC) Dimensions, Size & Specs

The width of the Mazda Sentia (HC) is 1795 mm or roughly 70.7 inches. This width allows for comfortable seating arrangements inside the cabin, providing ample shoulder room for passengers. The relatively broad body contributes to a spacious feel inside the cabin, enhancing comfort for both front and rear occupants.

The Mazda Sentia (HC) stands between 1395 mm and 1420 mm in height, which converts to approximately 54.9 inches to 55.9 inches. Variations in height are typically due to different suspension setups or tire sizes within the factory options. Overall, this relatively low height contributes to a sporty and aerodynamic profile.

The curb weight of the Mazda Sentia (HC) ranges from 1530 kg to 1640 kg, or around 3372 lbs to 3616 lbs. This medium to heavy weight is typical for full-size executive sedans of the era and contributes to stability and a comfortable ride. The weight also affects fuel efficiency and performance, making the car well-balanced between comfort and power.

The Mazda Sentia (HC) sedan offers a luggage capacity of 360 liters, approximately 12.7 cubic feet. This is adequate for everyday needs, including groceries or luggage for several passengers. For longer trips, the space can hold typical travel essentials but might require careful packing if transporting multiple large suitcases.

A standard garage space typically measures about 2400 mm (94.5 inches) in width and around 4800 mm (189 inches) in length. Given that the Mazda Sentia (HC) has a length between 4895 mm and 4920 mm (192.7 to 193.7 inches) and a width of 1795 mm (70.7 inches), it will fit into a standard garage lengthwise with minimal extra space. Width-wise, it fits comfortably, leaving sufficient room for opening doors and moving around the vehicle inside the garage.

Compared to its predecessor, the original Mazda Sentia (F103) produced earlier, the HC generation is slightly larger in all dimensions. The length increased from roughly 4800 mm to up to 4920 mm, providing more interior room and trunk space. Width and height also saw modest increases, enhancing passenger comfort and the car's road presence, while modernizing its design and engineering to fare better in the competitive executive sedan market.

When compared to rivals like the Toyota Celsior (Lexus LS 400) or Nissan President, the Mazda Sentia (HC) holds its own with a length just under 5 meters (around 4.9 m or 16 ft), width at just shy of 1.8 meters, and a relatively sleek height. While slightly smaller in width than some American full-size sedans, it offers superior maneuverability and efficiency. Its dimensions position it as a competitive executive sedan combining spaciousness and manageable size.

The Mazda Sentia (HC) comes standard with 15-inch rims measured at 6J x 15 ET 50 and tires sized 205/65 R15 93 H. The relatively tall tire profile (65 aspect ratio) provides a comfortable ride by absorbing road imperfections effectively. These tire dimensions balance handling characteristics and ride comfort appropriate for a luxury sedan of its class and era.

The Mazda Sentia (HC) is a full-size executive sedan produced between 1991 and 2000, known for its combination of Japanese engineering quality and luxury refinement. It was designed to compete in a segment alongside other premium sedans offering spacious interiors, smooth performance, and solid build quality. The Sentia featured advanced options for its time, such as refined suspension setups, comfortable seating, and a balance of performance and comfort that catered to business executives and discerning drivers.