1993 Mazda Lantis (CBA8P) Dimensions, Size & Specs

The Mazda Lantis (CBA8P) has a width of 1695 mm (about 66.7 inches), which is fairly typical for compact sedans from the mid-1990s. This width allows for reasonably spacious seating arrangements for the driver and passengers without making the car too bulky. The width enhances stability on the road and provides a comfortable cabin environment. However, due to its moderate width, it remains manageable on narrow roads and through tight parking spots, striking a balance between space and agility.

The height of the Mazda Lantis (CBA8P) is 1355 mm (approximately 53.3 inches). This relatively low height contributes to a sportier and more aerodynamic profile, which can enhance fuel efficiency and reduce wind noise compared to taller vehicles. For occupants, while the height is on the lower side, the sedan design typically ensures sufficient headroom for average-sized adults. This compact height also lowers the vehicle's center of gravity, contributing to better handling and cornering stability.

The Mazda Lantis (CBA8P) weighs between 1160 kg to 1200 kg (approximately 2557 to 2646 pounds) when curb weight is considered. This relatively lightweight construction benefits both performance and fuel efficiency. A lighter vehicle generally accelerates more quickly and handles better, contributing to a sportier driving experience. Additionally, lower weight improves fuel economy, as the engine expends less energy moving the car. The Mazda Lantis balances weight and structural integrity, promoting agility while maintaining safety.

The Mazda Lantis (CBA8P) comes with two primary rim sizes: 5.5J x 14 ET 45 and 6.5J x 16 ET 45. Corresponding tire sizes are 185/65 R14 86H and 205/50 R16 87V. The 14-inch wheels with higher-profile tires typically contribute to a softer ride, absorbing bumps well and offering comfort over rough roads. Conversely, the larger 16-inch wheels with lower-profile tires enhance handling and cornering responsiveness but may provide a firmer ride. This setup allows owners to choose a configuration balancing comfort and sportiness based on their preferences.

Yes, the Mazda Lantis (CBA8P) fits comfortably within a standard home garage. Standard garages typically have a length of about 5400 to 6000 mm (213 to 236 inches), a width around 2700 mm (106 inches), and a height exceeding 2100 mm (83 inches). Given the Lantis measures 4490 mm in length (176.8 inches), 1695 mm in width (66.7 inches), and 1355 mm in height (53.3 inches), it fits well within these dimensions. There is ample space left for opening doors and maneuvering around the vehicle inside a typical garage setup.

The Mazda Lantis (CBA8P) succeeded previous compact models, like the Mazda 323 and Familia. Compared to these predecessors, the Lantis embraced a more aerodynamic and sport-oriented design, offering a length of 4490 mm and width of 1695 mm, typically slightly longer and wider than earlier compact sedans from Mazda. This increase provided more interior space and a more modern aesthetic aligned with mid-1990s design trends. The lowered height of 1355 mm also contributed to a sleeker profile, enhancing performance and visual appeal compared to boxier predecessors.

In comparison with similar compact sedans from the 1990s, such as the Honda Civic, Toyota Corolla, and Nissan Sentra, the Mazda Lantis (CBA8P) sits comfortably within the typical size range. Its 4490 mm length and 1695 mm width are competitive dimensions that offer slightly more room than some competitors, while its lower height emphasizes sportiness. Feature-wise, the Lantis often provided sporty design cues and driving dynamics that set it apart. While many compact sedans prioritized practicality, the Lantis leaned into blending comfort with spirited driving.

While specific interior measurements for the Mazda Lantis (CBA8P) vary slightly depending on trim, the sedan's overall dimensions translate to a comfortable cabin for four to five occupants. The vehicle's moderate width of 1695 mm permits adequate shoulder room. Headroom is reasonable given the height of 1355 mm, though taller passengers might find it a bit snug compared to taller sedans. Legroom in both front and rear seats is typical for compact sedans of its era, balancing passenger comfort with a compact footprint. Overall, the Lantis provides a cozy yet practical interior experience.

The Mazda Lantis (CBA8P) was primarily produced as a compact sedan, with limited variations that impacted size notably. However, there were sportier trims available that featured different wheel and tire setups, such as the 16-inch rims with lower-profile tires compared to the base 14-inch wheels, thus slightly affecting handling and ride quality but not the car's fundamental dimensions. Special editions may also have included feature enhancements inside and subtle exterior styling upgrades, but the overall size and core dimensions remained consistent throughout the production period from 1993 to 1998.