1987 Mazda Capella Coupe Dimensions, Size & Specs

The curb weight of the Mazda Capella Coupe from 1987 to 1994 is approximately 1160 kg (2557 lbs). This relatively light weight contributes to nimble handling and improved fuel efficiency compared to heavier vehicles. A lighter vehicle generally accelerates better and requires less power to maintain speed, which can translate into better mileage. It also helps the suspension and chassis respond more precisely to driver inputs, making the driving experience more engaging and sporty.

The Mazda Capella Coupe is fitted with tires sized 195/60 R15 86 H, mounted on 6J x 15 inch rims with an offset of ET 50. The 195 mm wide tire width offers a good balance of grip and ride comfort, while the 60 aspect ratio ensures adequate sidewall height for absorbing road imperfections. The 15-inch rims complement the sporty design and maintain good tire choice availability. The ET 50 offset places the wheel well within the fenders, offering stable handling and an appealing stance.

Yes, the Mazda Capella Coupe fits comfortably into a standard garage. With a length of 4450 mm (175.2 inches) and a width of 1690 mm (66.5 inches), the vehicle’s dimensions are well within typical garage space allowances. Standard single-car garages usually measure around 3 meters (118 inches) wide and 6 meters (236 inches) deep, so the Capella Coupe leaves sufficient space around for easy parking and door opening, ensuring convenience for everyday use.

The 1987-1994 Mazda Capella Coupe generally features a similar compact footprint compared to its predecessor but with subtle refinements. This generation's length of 4450 mm (175.2 inches) and width of 1690 mm (66.5 inches) show slight increases over prior models, aiming for improved interior space and a more modern look. Height remains low at 1360 mm (53.5 inches), maintaining the sporty coupe stance. These changes reflect Mazda's intent to enhance usability and aesthetics while retaining the agile driving dynamics beloved by fans of the earlier generation.

Compared to similar coupes from the late ‘80s and early ‘90s, the Mazda Capella Coupe holds its own as a compact yet sporty option. With dimensions of 4450 mm (175.2 inches) long, 1690 mm (66.5 inches) wide, and 1360 mm (53.5 inches) tall, it is slightly longer than many competitors such as the Honda Prelude and Toyota Celica of the era, which typically measured around 4200–4400 mm in length. The Capella’s width is commonly matched or slightly narrower, which helps with maneuverability. Its curb weight of 1160 kg (2557 lbs) is also competitive, tending to be lighter or similar, contributing to agile handling characteristics.

Despite its compact exterior dimensions (4450 mm length, 1690 mm width), the Mazda Capella Coupe offers efficient interior packaging typical of coupes of its time. The relatively low height of 1360 mm means headroom can be snug, especially for taller occupants, but Mazda’s design balances this with supportive seating and good ergonomics. The coupe’s two-door layout focuses on driver and front passenger comfort, with sporty seating positioning. Rear seats are generally suitable for short trips or smaller passengers but offer limited leg and headroom due to the sloping roofline characteristic of coupes.

Yes, the wheel and tire setup of the Mazda Capella Coupe enhances its handling capabilities. The car rides on 6J x 15 inch rims equipped with 195/60 R15 tires, which provide a balanced combination of grip, responsiveness, and ride comfort. The 195 mm tire width offers sufficient contact patch for confident cornering, while the 60 aspect ratio sidewall height helps absorb road imperfections, contributing to a smoother ride. The ET 50 offset ensures the wheels are properly positioned within the arches, providing stability and agility during dynamic driving situations.

Given its compact dimensions—4450 mm (175.2 inches) long and 1690 mm (66.5 inches) wide—the Mazda Capella Coupe is practical for urban parking and maneuvering. Its relatively modest size allows for easier navigation through tight city streets and smaller parking spaces, which is often a challenge with larger coupes. The car’s curb weight of 1160 kg (2557 lbs) also means it’s nimble and responsive at low speeds, making parallel parking and U-turns easier compared to larger or heavier models. Its turning radius, while not specified exactly, is likely well-suited to urban driving, reflecting the car's design as a sporty yet practical coupe.

The Mazda Capella Coupe produced between 1989 and 1994 is known for its sporty design, balanced performance, and practicality in a compact coupe form. It commonly features reliable Mazda engineering with a focus on driving enjoyment, combining moderate power output with light curb weight. The coupe styling gives it an attractive profile with a low, aerodynamic silhouette. Inside, it offers a driver-centric cabin with usable space for front passengers and modest rear seating. Its handling characteristics and wheel/tire setup support a confident and engaging driving experience, making it a popular choice for enthusiasts seeking a stylish yet affordable coupe during its production period.