2026 Leapmotor B01 Dimensions, Size & Specs

The Leapmotor B01 2026, with a length of 4770 mm (187.8 inches), width of 1880 mm (74.0 inches), and height of 1490 mm (58.7 inches), fits comfortably within the dimensions of a standard residential garage. Most standard garages measure approximately 6 meters (20 feet) in length and about 2.4 to 3 meters (8 to 10 feet) in width, providing sufficient space for the B01 while allowing room for opening doors and maneuvering around the car. Its ground clearance of 140 mm (5.5 inches) is also typical for sedans, ensuring compatibility with most garage ramps and entryways. Therefore, owners of the Leapmotor B01 should experience no issues parking their sedan in commonly sized residential garages.

The curb weight of the Leapmotor B01 2026 ranges between 1625 kg to 1711 kg (3584 to 3773 lbs) depending on the specific trim and configuration. This weight range suggests it's relatively light for a sedan of its size, aiding in fuel efficiency and handling dynamics. Variations in weight are typically due to different equipment levels, battery sizes (if it's an electric vehicle), or additional features that add to the car’s mass. Despite this range, the B01 maintains a balanced weight distribution that contributes to dynamic stability and a comfortable ride. The maximum weight, which accounts for passengers and cargo, varies between 2015 kg and 2101 kg (4441 to 4635 lbs), indicating that the vehicle is engineered to carry a substantial load without sacrificing performance or safety.

The Leapmotor B01 2026 features a ground clearance of 140 mm (5.5 inches). This figure is typical for modern sedans and is balanced between aerodynamic efficiency and practicality. At 140 mm, the car provides enough clearance to navigate common urban obstacles such as speed bumps, driveways, and potholes without scraping the undercarriage. However, it is not particularly suited for off-road or very rough terrain driving where higher clearance is necessary. The chosen ride height improves stability and handling by lowering the center of gravity, which is beneficial on paved roads and highways, making the driving experience smoother and more confident.

The Leapmotor B01 2026 offers a luggage capacity of 460 liters (approximately 16.2 cubic feet). This is considered generous for a sedan in its class, providing ample space for suitcases, groceries, or daily cargo needs. The 460-liter trunk volume allows for practical usage, accommodating several medium to large-sized bags, which makes it suitable for long trips, family outings, or regular commuting. When compared to similar sedans, this capacity stands out as competitive and beneficial for those who value cargo space without opting for SUVs or larger vehicles. The well-designed trunk space complements the overall usability of the B01.

The Leapmotor B01 2026 is equipped with 18-inch rims paired with tires sized 225/45 R18. These specifications indicate a balance between sporty aesthetics and practical ride comfort. The 18-inch rims provide a stylish look and improve handling by allowing for lower-profile tires, which generally offer enhanced grip and road feedback. The tire width of 225 mm contributes to stability and traction, particularly during cornering and braking maneuvers. The aspect ratio of 45 ensures that the tires have enough sidewall height to absorb bumps, maintaining ride comfort without sacrificing driving precision. Overall, these tire and rim sizes are well-suited for a midsize sedan focused on performance, safety, and everyday usability.

With a width of 1880 mm (74.0 inches), the Leapmotor B01 2026 provides a spacious cabin that enhances passenger comfort by allowing for generous shoulder and elbow room, especially in the front and rear seats. This width is wide enough to comfortably seat three passengers in the rear without feeling cramped, which is a key advantage for family or group travel. However, being wider than some compact sedans, it demands a bit more attention when maneuvering through narrow urban streets, tight parking lots, or congested traffic conditions. Still, many modern parking garages and city roads can accommodate vehicles of this width with ease, making the B01 a practical choice for both city and highway driving.

Since the Leapmotor B01 2026 represents the first generation or a newly introduced model (produced from 2025 onward) without a publicly known predecessor model directly named B01, there is no direct predecessor for dimensional or weight comparison. However, if compared to other Leapmotor sedans or early conceptual models, the B01 typically showcases increased length and width, aligning with a trend toward larger vehicles to maximize interior space and comfort. Its weight range from 1625 kg to 1711 kg reflects modern materials usage that balances structural rigidity and efficiency. The Leapmotor B01 thus sets a new benchmark in size and presence within the brand's lineup, rather than continuing from a previous generation.

In comparison to similar mid-size sedans from other manufacturers, the Leapmotor B01 2026 stands out with its generous dimensions—4770 mm (187.8 inches) in length and 1880 mm (74.0 inches) in width—placing it on the larger end of the mid-size segment. Many competitors in this category offer trunk capacities ranging from about 400 to 450 liters, making the B01's 460-liter luggage space competitive. The car’s curb weight range of 1625-1711 kg is typical for electric or hybrid-powered sedans, indicating advanced technology integration yet careful weight management. Additionally, the 18-inch wheels and low 140 mm ground clearance optimize both ride comfort and sporty handling. Overall, the B01 combines ample interior and cargo space with modern styling and dynamic attributes, making it a strong contender among mid-size sedans, especially for buyers seeking a balance of size, efficiency, and advanced technology.

The Leapmotor B01 2026 has a height of 1490 mm (58.7 inches), which contributes to a sleek and streamlined profile typical of contemporary sedans. This relatively low height reduces air resistance, improving aerodynamic efficiency which benefits fuel consumption or electric range, depending on the drivetrain. Internally, the height strikes a balance to ensure sufficient headroom for most passengers without creating an overly bulky exterior appearance. This design also supports better vehicle stability at higher speeds by lowering the center of gravity. The B01’s height complements its length and width dimensions to provide a comfortable and roomy interior, while contributing to an elegant, low-slung silhouette that appeals to style-conscious buyers.