1987 Kia Concord Dimensions, Size & Specs

The curb weight of the Kia Concord (1987-1995) is approximately 1150 kg (2535 pounds). This weight is quite typical for mid-size sedans of that era, striking a good balance between sturdiness and agility. The relatively moderate curb weight contributes positively to the vehicle's fuel efficiency and handling dynamics. Lighter cars generally consume less fuel and experience less tire and brake wear, making the Concord economical to run. Additionally, the weight supports a stable driving experience, reducing excessive body roll and improving road grip, which enhances driver confidence on diverse road conditions.

The Kia Concord is equipped with 185/70 R14 S tires. This specification denotes a tire width of 185 mm, an aspect ratio of 70 (meaning the tire's height is 70% of its width), and a 14-inch rim diameter. The 'S' speed rating indicates suitability for speeds up to 180 km/h (112 mph). These tires strike a balance between comfort and handling, offering a smooth ride and good road grip. The sidewall height supports shock absorption over bumps, thus enhancing passenger comfort, while the tire width ensures sufficient contact with the road surface for stable cornering and braking.

Yes, the Kia Concord is well-sized to fit comfortably inside a standard garage. With its length of 4570 mm (179.9 inches or about 15 feet), width of 1720 mm (67.7 inches or about 5.6 feet), and height of 1405 mm (55.3 inches or about 4.6 feet), it fits well within typical residential garage dimensions. Most standard single-car garages measure approximately 6 meters (around 20 feet) in length and 3 meters (about 10 feet) in width, providing ample clearance around the vehicle for easy parking and entry/exit. The compact height also ensures convenience when opening car doors or storing rooftop cargo.

The Kia Concord's dimensions of 4570 mm length, 1720 mm width, and 1405 mm height place it firmly in the mid-size sedan category when compared with contemporary models from the late 1980s and early 1990s. In terms of length, it was comparable to popular options like the Toyota Camry and Honda Accord of that era, which similarly measured between 4500 mm to 4700 mm. With slightly narrower width compared to some rivals, it was easier to maneuver in tighter urban environments. Its curb weight of 1150 kg was also competitive, reflecting an efficiently engineered midsize vehicle that aimed for a blend of performance, comfort, and economy.

The Kia Concord, introduced in 1987, did not have a direct predecessor under the same nameplate as Kia was establishing itself more firmly in global markets during this period. Earlier compact models by Kia and Hyundai were generally smaller in length, width, and height compared to the Concord. The Concord's 4570 mm length and 1720 mm width represented a step up into the mid-size segment, offering more interior space and comfort suited for family use and longer drives. This transition marked Kia’s strategic move to compete more directly with established mid-size sedans on size, roominess, and driving dynamics.

The Kia Concord’s exterior dimensions translate into a reasonably spacious interior cabin for its class and era. With a length of 4570 mm and width of 1720 mm, the car provides comfortable seating for up to five passengers. The relatively wide body and carefully designed interior cabin maximize shoulder and elbow room for occupants. The height of 1405 mm supports adequate headroom, especially for front and rear passengers. Knee and legroom meet the standards expected of a mid-size sedan, ensuring a comfortable ride for daily commutes and longer journeys alike. Rear-seat passengers benefit from reasonable space, making the Concord a practical choice for families.

With a length of 4570 mm and a width of 1720 mm, the Kia Concord is maneuverable enough for urban driving and parking. Its dimensions allow it to fit in typical parking spaces comfortably while providing enough cabin space inside. The relatively modest size compared to larger sedans means drivers can navigate city streets and tight parking spots with greater ease. The car’s tire size and weight contribute to stable handling and good traction, which further aids urban handling. Compact height also means better visibility and easier handling in crowded environments, making the Concord suitable for both city and suburban settings.

The Kia Concord falls into the mid-size sedan segment alongside models like the Toyota Camry, Honda Accord, Nissan Bluebird, and Mitsubishi Galant typical of the late 1980s to mid-1990s. Dimensionally, the Concord’s 4570 mm length and 1720 mm width are very comparable to these competitors. It tends to offer similar passenger comfort and driving practicality but often at a more affordable price point, making it attractive for budget-conscious buyers. Though sometimes less powerful or featuring fewer luxury options than Japanese competitors, the Concord’s balance of size, weight, and economy made it a competitive choice for families and commuters looking for reliable transportation.

The Kia Concord has a body height of 1405 mm (55.3 inches), which contributes to its relatively low and sleek profile, aiding aerodynamics and handling stability. While the specific ground clearance is not listed here, typical mid-size sedans of this period generally have around 140-160 mm (5.5-6.3 inches). This height allows a balance between comfortable cabin entry and exit, as well as road clearance sufficient for most paved roads and mild terrain. The moderate height helps reduce wind resistance while driving, improving fuel economy and contributing to a stable, comfortable ride, particularly at highway speeds.