2019 Italdesign Da Vinci Concept Dimensions, Size & Specs

The Italdesign Da Vinci Concept is designed with a notably wide stance characteristic of modern sporty coupes, likely measuring close to 2.0 meters (about 79 inches) in width. This width enhances stability, road presence, and cornering ability, putting it on par or slightly wider than typical coupes that usually range from 1.8 to 1.95 meters (71 to 77 inches) wide. Such a broad profile supports advanced aerodynamic features and aggressive styling cues typical of Italdesign’s concept cars, balancing aesthetics and performance characteristics.

With an estimated height likely around 1.2 meters (approximately 47 inches), the Italdesign Da Vinci Concept embodies the low-slung profile expected from a performance coupe concept. This reduced height helps lower the center of gravity, improving handling and aerodynamic efficiency by minimizing air resistance. While this height may limit vertical interior space compared to larger vehicles, it aligns with the sporty, driver-focused design intent typical of concept coupes, prioritizing sleek aesthetics and performance driving dynamics over expansive cabin height.

Specific wheelbase figures for the Italdesign Da Vinci Concept are not officially detailed, but concept cars in this segment usually feature a wheelbase between 2.5 to 2.7 meters (98 to 106 inches). A longer wheelbase generally provides greater ride comfort and stability at high speeds, while a shorter wheelbase can enhance agility and cornering responsiveness. For the Da Vinci Concept, Italdesign’s expertise in design likely balanced these factors to achieve optimal driving dynamics befitting a futuristic coupe prototype.

A standard residential garage typically measures about 2.4 to 2.7 meters (8 to 9 feet) in width and a minimum of about 5.0 meters (16 feet) in length. Given the Italdesign Da Vinci Concept's compact coupe-sized dimensions, with an approximate width near 2.0 meters (79 inches) and length around 4.4 meters (173 inches), it should comfortably fit in most standard garages. Its height, estimated near 1.2 meters (47 inches), well under typical garage door heights, poses no clearance issues. Therefore, despite its striking design, the Da Vinci Concept would fit within typical residential garage constraints.

As a concept car, exact weight figures for the Italdesign Da Vinci Concept are not publicly confirmed. However, given its compact coupe design and the use of lightweight materials typical in prototype vehicles, one might expect a weight range approximately between 1,200 to 1,500 kg (2,645 to 3,307 lbs). A lighter weight optimizes acceleration, braking, and handling performance, which is crucial for concept cars designed to showcase new technologies and driving dynamics. Italdesign likely employed advanced composites and lightweight materials to balance structural integrity with reduced mass.

The Italdesign Da Vinci Concept does not have a direct predecessor in a production lineage as it is a standalone prototype; however, compared to previous Italdesign concept vehicles, it continues the brand's tradition of sleek, aerodynamic coupé styling with a futuristic edge. Dimensionally, the Da Vinci is comparable or slightly more compact than prior Italdesign models like the Zerouno, favoring a more sculpted and minimalist approach. Stylistically, the Da Vinci emphasizes clean lines, elegant proportions, and innovative use of lighting and surfaces, representing a sophisticated evolution rather than a radical departure.

Against other contemporary concept coupes introduced around 2019, the Italdesign Da Vinci Concept fits comfortably within the typical size range. Its length, approximately 4.4 meters (173 inches), aligns closely with competitors like the BMW Vision M NEXT or Audi PB18 e-tron, which range from 4.3 to 4.6 meters (169 – 181 inches). With a width close to 2.0 meters (79 inches), it maintains a stable and aggressive stance. The low-profile height of around 1.2 meters (47 inches) is consistent with cutting-edge aerodynamic designs. This overall size balance supports Italdesign’s goal of a dynamic yet elegant coupe concept.

The Italdesign Da Vinci Concept, as a coupe prototype, is designed primarily for two passengers, offering a driver-focused cockpit typical of high-performance concept cars. The compact and sleek exterior dimensions naturally limit interior space, emphasizing ergonomics, advanced materials, and cutting-edge technology over spaciousness. Although specifics aren’t released, the interior likely integrates futuristic controls and minimalist design elements to maximize perceived space while maintaining intimate driver engagement consistent with iconic coupe architecture.

The Italdesign Da Vinci Concept showcases innovative design and technologies that distinguish it from traditional coupes and other concept vehicles. Notably, it features a minimalist aerodynamic shape with smooth body surfaces and integrated lighting elements that reflect Italdesign’s vision of future automotive elegance. Inside, it introduces advanced human-machine interface concepts focusing on driver experience, including digital displays integrated seamlessly into the dashboard. The overall prototype embodies Italdesign's commitment to blending cutting-edge technology, sustainable materials, and artistic automotive design.