1995 Honda Inspire II (UA1/UA2/UA3) Dimensions, Size & Specs

The width of the 1995 Honda Inspire II ranges from 1785 mm to 1800 mm (70.3 to 70.9 inches). This width allows for a comfortable seating arrangement inside the cabin, with adequate shoulder room for passengers in both front and rear seats. The wider car body improves stability and handling on the road by increasing the vehicle’s track. Overall, the width dimension balances interior comfort with exterior dynamics.

The Honda Inspire II has a height ranging from 1405 mm to 1415 mm (55.3 to 55.7 inches) and a ground clearance of 160 mm (6.3 inches). This relatively low height profile enhances aerodynamic performance and contributes to a sporty, low center of gravity feel while driving, improving cornering and stability. The ground clearance is typical for sedans of this class, providing adequate distance from the road to avoid common road obstacles without compromising handling. These dimensions also mean that the Inspire II can comfortably fit within the height restrictions of most standard home garages without difficulty.

Yes, the Honda Inspire II (UA1/UA2/UA3) produced from 1995 to 1998 fits comfortably within the size of a typical domestic garage. With a maximum length of around 4870 mm (191.7 inches), a width up to 1800 mm (70.9 inches), and a height under 1420 mm (55.9 inches), it remains within the limits that most single-car garages provide. Standard garages usually offer a clearance of about 2.4 to 2.7 meters in height and 2.5 to 3 meters in width, so parking the Inspire II generally poses no challenge. The moderate ground clearance of 160 mm ensures safe entry and exit on typical domestic driveways.

Compared to its predecessor, the Honda Inspire II (UA1/UA2/UA3) saw slight adjustments in dimensions that generally favored a larger and more comfortable sedan package. While exact predecessor dimensions vary, the Inspire II’s length between 4840 and 4870 mm (190.6 to 191.7 inches) and width reaching up to 1800 mm (70.9 inches) represented a modest increase for enhanced interior room and road presence. The curb weight in the 1370 to 1500 kg (3020 to 3307 lbs) range reflected improved structural integrity and added features. The evolution helped the Inspire maintain competitiveness in the mid-to-full-size segment and refined its appeal compared to the earlier generation.

The curb weight of the Honda Inspire II produced from 1995 to 1998 ranges from approximately 1370 kg to 1500 kg (around 3020 to 3307 pounds). This weight variation depends on specific trim levels, engine variants, and extra equipment installed. The moderate curb weight contributes to balanced performance and fuel economy. Despite its weight, the Inspire II was engineered with a solid chassis to provide a good ride quality and handling dynamics typical of Honda vehicles in its class.

The Honda Inspire II came equipped primarily with 15-inch rims, specifically sized at 6J x 15, which were fitted with tires in three main variants: 195/65 R15, 205/60 R15, and 205/65 R15. These tire sizes balanced comfort, road grip, and noise levels, optimizing the driving experience. The tire width and profile options allowed some customization based on trim and market, but overall these dimensions helped maintain the vehicle’s stability, handling, and braking capabilities.

The Honda Inspire II (1995-1998) was sized and positioned competitively among mid-1990s mid-size and entry-level luxury sedans. With its length around 4.84 to 4.87 meters (190.6 to 191.7 inches) and width up to 1.8 meters (70.9 inches), it was close in size to rivals like the Toyota Camry XV10 and Nissan Cefiro A32, all designed for comfortable family and executive transport. The Inspire's moderate ground clearance and weight balanced performance, interior space, and handling. Compared to peers, it offered a compelling mix of Honda reliability and refinement while matching or slightly exceeding competitors in physical dimensions.

The Honda Inspire II maintains a ride height (ground clearance) of 160 mm (6.3 inches), which is standard for mid-size sedans of its era. This clearance ensures that the car can easily handle typical urban road conditions, including speed bumps, ramps, and uneven surfaces without risking damage to the underbody. While low enough to enhance handling and reduce aerodynamic drag, the 160 mm clearance strikes a balance to keep the car practical for daily driving without causing excessive wear or discomfort.

The second-generation Honda Inspire (UA1/UA2/UA3) is a mid-size sedan produced between 1995 and 1998, primarily targeted at buyers seeking a blend of executive comfort, reliability, and Honda’s signature driving dynamics. It offered a spacious and well-appointed interior, competitive dimensions for its class, and a solid chassis supported by a moderate curb weight ranging from 1370 to 1500 kg. Available tire and rim options provided varying levels of ride comfort and sportiness. Thanks to its size and styling, the Inspire II was well-suited for family, business, and personal use, fitting easily into standard garages and providing dependable performance in both urban and highway environments.