1997 Holden Commodore Wagon (VT) Dimensions, Size & Specs

The curb weight of the Holden Commodore Wagon VT ranges from 1610 kg to 1700 kg (approximately 3549 to 3748 pounds). This variation depends on the specific model variant, engine choice, and equipment levels. The weight reflects its robust mid-size wagon build, balancing structural integrity for safety and ride comfort against performance and fuel economy considerations.

The luggage capacity of the Holden Commodore Wagon VT is 470 liters (approximately 16.6 cubic feet) with all rear seats upright, providing a reasonable space for everyday cargo needs. When the rear seats are folded down, the capacity dramatically increases to between 2683 and 2685 liters (about 94.7 to 94.8 cubic feet), offering vast cargo space suitable for large items, extended trips, or transportation of bulky goods.

The Holden Commodore Wagon VT is compatible with three tire sizes: 205/65 R15, 215/60 R16, and 225/55 R16. The choice among these sizes typically depends on the trim level and wheel options, balancing ride comfort, handling, and aesthetics.

With a maximum length of around 5084 mm (200.2 inches), width close to 1847 mm (72.7 inches), and a height of 1545 mm (60.8 inches), the Holden Commodore Wagon VT generally fits comfortably inside standard residential garages in Australia, which often accommodate vehicles up to about 6 meters in length and 3 meters in width. Similarly, typical garages in North America and Europe are spacious enough to house this vehicle without difficulty. However, owners should always consider any storage racks, wall protrusions, or additional equipment inside the garage that might reduce usable dimensions.

Compared to the Commodore Wagon VS, which was produced before the VT generation, the Holden Commodore Wagon VT is slightly larger in all key dimensions. The VT extended its length to between 5040 and 5084 mm (198.4 to 200.2 inches) from the VS's slightly shorter length, increased width marginally to about 1845-1847 mm (72.6-72.7 inches), and maintained a similar height near 1545 mm (60.8 inches). This size increase translated to better interior space, improved cargo capability, and enhanced overall road presence, marking a meaningful evolution in the station wagon segment for Holden.

In the context of mid-size station wagons from its era, such as the Ford Falcon Wagon and Toyota Camry Wagon, the Holden Commodore Wagon VT stands out for its relatively larger length and cargo capacity. While many wagons hovered around 4800 to 5000 mm in length, the VT's slight edge going over 5 meters (about 16.6 feet) delivers more interior room and greater utility, especially with its expansive folded-seat luggage space of nearly 2.7 cubic meters. Its width, around 1.85 meters (6 feet), is comparable but generally offers more road presence. This made the VT competitive and often preferable for buyers seeking a spacious family wagon with robust performance.

The Holden Commodore Wagon VT offers a roomy interior layout befitting its extended exterior dimensions. Passengers benefit from ample legroom and headroom in both front and rear seats, with a design that prioritizes comfort over its station wagon peers. The expansive luggage area of 470 liters (16.6 cubic feet) increases dramatically when folding the rear seats flat to over 2680 liters, affording versatility for carrying large cargo. This capacity is competitive within mid-size wagons, providing an excellent balance between passenger capacity and freight space, ideal for families, outdoor enthusiasts, and those needing a practical vehicle for everyday and leisure use.

Given the Holden Commodore Wagon VT’s substantial length of up to 5084 mm (200.2 inches) and width of approximately 1847 mm (72.7 inches), maneuvering in tight urban environments or narrow parking spaces can be a consideration. Drivers may find its size requires greater attention when parking or navigating confined streets. However, its design includes good forward visibility and a relatively manageable turning radius for a car of its size. Modern driving aids, such as power steering and optional parking sensors on some models, help mitigate these challenges.

The curb weight range of 1610 to 1700 kg (3549 to 3748 pounds) places the Holden Commodore Wagon VT as a moderately heavy vehicle in its class, reflecting its sturdy build and equipment load. This weight influences fuel consumption somewhat, as heavier vehicles generally require more energy to accelerate and maintain speed. However, the VT leveraged a range of efficient V6 and V8 engines to balance power and economy, providing respectable fuel efficiency for its size and class. On the driving dynamics front, the weight contributes positively to ride quality and stability, ensuring a smooth and planted driving experience typical of Holden's performance-oriented engineering during this period.