1997 Holden Commodore (VT) Dimensions, Size & Specs

The Holden Commodore (VT) has a width of about 1840 to 1842 mm (72.4 to 72.5 inches). This relatively wide stance contributes significantly to passenger comfort inside, allowing for spacious seating arrangements and improved shoulder room. The wider body also enhances vehicle stability and cornering dynamics, adding to its appeal as a family and executive sedan.

The height of the Holden Commodore (VT) ranges between 1425 mm and 1450 mm (56.1 inches to 57.1 inches). This height balances adequate headroom for most passengers with an aerodynamic profile that helps improve fuel efficiency and reduces wind noise. The relatively low height compared to some SUVs also facilitates easier entry and exit for occupants.

The Holden Commodore (VT) has a curb weight ranging from 1550 kg to 1670 kg (3417 to 3682 lbs), depending on the variant and equipment levels. This weight range is typical for full-sized sedans of its era, offering a good balance between structural rigidity, passenger comfort, and manageable fuel consumption. Heavier weights usually indicate more features or larger engines, which impacts acceleration and handling dynamics.

The Holden Commodore (VT) sedan offers a luggage capacity of approximately 475 liters (16.8 cubic feet). This is quite generous for a sedan in its class, allowing it to accommodate everyday grocery runs, luggage for family trips, or other cargo with ease. The trunk space is well-shaped for easy loading and fits large suitcases or multiple bags comfortably, enhancing its practicality.

The Holden Commodore (VT) supports a variety of rim sizes mainly from 15 to 18 inches. Compatible tire sizes include 205/65 R15, 225/55 R15, 225/60 R16, 215/60 R16, 225/55 R16, 235/45 R17, and 235/40 R18. This range allows owners to select tires tailored for comfort, performance, or aesthetics depending on their driving preferences.

Yes, the Holden Commodore (VT) fits into a standard garage typical of Australian and many international homes. With its maximum length of around 4964 mm (195.4 inches) and width about 1842 mm (72.5 inches), it is slightly larger than average sedans but still within typical garage dimensions. Homeowners should ensure garage depth of at least 5 meters (197 inches) and width of 2.5 meters (98 inches) to comfortably accommodate the vehicle with some space to spare.

Compared to the Holden Commodore VS (produced from 1995 to 1997), the VT series saw a significant increase in dimensions. The VT is approximately 140 mm (5.5 inches) longer, slightly wider by around 40 mm (1.6 inches), and marginally taller by roughly 30 mm (1.2 inches). These increases translated into improved interior space, better passenger comfort, and a more imposing exterior stance, making the VT a notable upgrade over the VS in terms of size and presence.

The Holden Commodore (VT) stood out in its full-size sedan segment when compared to key competitors like the Ford Falcon AU of the same era and the Toyota Avalon. With its length approaching 5 meters (16.3 feet), it was generally among the largest Australian sedans, providing superior rear legroom and luggage capacity. While it was slightly heavier than some rivals, this added to a solid, comfortable ride quality. The Commodore’s interior dimensions and trunk capacity made it highly competitive for families and executives seeking both space and driving dynamics.

The Holden Commodore (VT) marked a significant leap forward in design and technology for Holden. Introduced in 1997, it featured a more aerodynamic and modern design compared to previous generations. It was the first Commodore to offer an independent rear suspension on higher specs, improving ride comfort and handling. The VT also introduced safety improvements like multiple airbags, ABS, and traction control in later models. Its long production run until 2006 reflected its popularity and enduring appeal in the Australian market as a spacious, comfortable, and versatile full-size sedan.