1972 Ford Granada (GGTL,GGFL) Dimensions, Size & Specs

The Ford Granada (GGTL, GGFL) sedan from 1972-1977 has a curb weight of about 1,410 kg (approximately 3,108 pounds). This moderate weight gives the car a stable and solid feel on the road while maintaining agility relative to the vehicle size. The curb weight influences fuel economy, acceleration, and handling, with this model offering a balance between robust build quality and manageable driving dynamics. The weight also affects braking performance and ride comfort, contributing to a steady and reassuring driving experience typical for sedans of that time.

The tires fitted on the Ford Granada (GGTL, GGFL) during the 1972-1977 production are sized 185/70 R14. This specification indicates a tire width of 185 mm (7.28 inches), with a sidewall height that's 70% of the tire width. Mounted on 14-inch rims with measurements of 6J x 14 ET38 and a bolt pattern of 5x112, these tires provide a good balance of grip, comfort, and durability for the car's weight and driving use, typical for a mid-size sedan of its time. The relatively moderate tire width helps ensure good ride quality and reasonable fuel efficiency.

The Ford Granada (GGTL, GGFL) models produced from 1972 to 1977 are equipped with 14-inch wheel rims, specifically sized at 6J x 14 ET38 with a 5x112 bolt pattern. These rims support the tires sized 185/70 R14, combining to deliver a stable and comfortable travel characteristic for the sedan. The 14-inch rim size was a common standard among mid-size sedans of the era, providing a good compromise between ride comfort, handling precision, and overall durability on varied road conditions.

Yes, the Ford Granada (GGTL, GGFL) sedan from 1972 to 1977 typically fits into a standard garage. Standard garage dimensions in many regions are roughly 2.4 to 2.7 meters (about 8 to 9 feet) in width and approximately 5.5 to 6 meters (18 to 20 feet) in length. With the Granada’s length around 4.78 meters (188.1 inches) and width about 1.82 meters (71.5 inches), the vehicle fits comfortably inside these standard spaces. This makes it practical for owners to park the vehicle indoors without spatial concerns, protecting it from weather exposure and enhancing security.

The Ford Granada (GGTL, GGFL) produced from 1972 to 1977 was designed as an evolution from its predecessor models, typically featuring modest growth in dimensions for improved interior space and road presence. While the exact predecessor model dimensions can vary by market, this Granada generation generally offered a slightly longer and wider body than earlier versions, enhancing passenger comfort and cargo capacity. The updates also reflected contemporary design trends toward wider safety margins and improved ergonomics, making this generation more modern and spacious relative to its predecessors.

The 1972-1977 Ford Granada (GGTL, GGFL) fits solidly within the size range of mid-size European sedans from the early 1970s. Its length of approximately 4.78 meters (188 inches) positions it competitively alongside contemporaries such as the BMW E3, Mercedes-Benz W114/W115, and Opel Rekord. The width of about 1.82 meters (71.5 inches) offers broad cabin space comparable to rivals. While not the largest, the Granada balanced size with comfort and practicality, making it appealing to buyers desiring executive-level space and amenity without excessive bulk. Its moderate height also contributed to a sleek profile without sacrificing interior headroom.

The Ford Granada (GGTL, GGFL) built from 1972 to 1977 comfortably seats five passengers, with two front seats and a spacious rear bench seat. The interior dimensions were designed to provide ample legroom and headroom for driver and passengers, consistent with mid-size luxury sedans of that time. The relatively wide exterior width of about 1.82 meters (71.5 inches) translates into generous shoulder and hip room on the inside. The headroom is sufficient for most adults, supported by the exterior height of approximately 1.4 meters (55 inches). The cabin layout prioritized comfort for long journeys, while materials and design emphasized a classic, understated elegance.

The trunk capacity of the Ford Granada (GGTL, GGFL) sedan from 1972 to 1977 was designed to offer generous space for luggage and cargo typical of executive mid-size sedans of the era. While specific volume metrics are less commonly stated for vehicles from this period, it is generally understood that the Granada's trunk space was ample enough to accommodate several suitcases or equivalent cargo, reflecting practical usability for family outings or business travel. The trunk layout, combined with the vehicle's length and wheelbase, allowed for ease of loading and secure storage, supporting the car's role as a comfortable and versatile touring sedan.

Owners of the 1972-1977 Ford Granada (GGTL, GGFL) occasionally report maintenance challenges typical for vehicles of this vintage. Rusting, due to metal corrosion over decades, is a common concern, especially in regions with harsh winters or high humidity. Mechanical components like the carburetor, ignition system, and suspension parts may require routine servicing and occasional replacement, reflecting the technology of the time. Finding original or compatible replacement parts can sometimes be difficult but is generally manageable through classic car specialist suppliers. Regular upkeep and preventive maintenance are crucial for preserving the car’s performance and reliability, making it a rewarding vehicle for enthusiasts experienced with classic European sedans.