2018 Fiat Panda III City Cross Dimensions, Size & Specs

The curb weight of the Fiat Panda III City Cross ranges from 980 kg to 1090 kg (2161 to 2403 pounds), depending on the trim and equipment. This relatively light weight enhances fuel efficiency, agility, and overall driving dynamics, allowing the vehicle to be responsive and economical in urban settings. Additionally, the lower weight aids in maneuverability and braking performance, which are key factors for city driving where frequent stops and tight turns are common.

The standard luggage capacity of the Fiat Panda III City Cross is 225 liters (7.95 cubic feet), which is sufficient for everyday shopping or small luggage needs. When the rear seats are folded down, the cargo volume increases significantly to 870 liters (30.7 cubic feet). This expansion provides enhanced versatility, allowing for the transport of larger items or more substantial loads, making the car suitable for various tasks beyond just city commuting, such as weekend trips or moving bulky equipment.

The Fiat Panda III City Cross comes equipped with 15-inch rims. It uses tire sizes of 185/65 R15 and 175/65 R15. These tire dimensions offer a balance between ride comfort, handling, and fuel efficiency. The relatively narrow tire width helps with better grip on urban roads and improved maneuverability, while the tire profile supports ride comfort and absorption of road irregularities.

Yes, the Fiat Panda III City Cross fits comfortably into a standard garage space. Its length of approximately 3.69 to 3.71 meters (145.2 to 145.9 inches) and width with mirrors folded at 1.66 meters (65.4 inches) make it compact enough for typical residential garages designed to accommodate vehicles roughly 5 meters in length and 2.5 meters in width. However, with the mirrors opened, the width extends to 1.88 meters (74.1 inches), so care should be taken when parking in narrower garages or spaces with tight clearance on either side.

Compared to the predecessor (the Fiat Panda II generation 2011-2017), the Panda III City Cross has maintained a similar compact footprint, although it is marginally longer and taller. The Panda II measured around 3,653 mm (143.8 inches) in length. The newer City Cross model has a length fluctuating roughly between 3686 mm to 3705 mm (145.2 to 145.9 inches), which presents slightly more interior and cargo room. The height has also increased to 1635 mm (64.4 inches) compared to the previous generation, enhancing headroom and the elevated SUV-inspired design cues. These incremental size increases provide more comfort and usability while preserving the renowned city-friendly dimensions.

When compared to other urban compact hatchbacks like the Suzuki Ignis or the Mini Countryman, the Fiat Panda III City Cross occupies a similar size bracket. The Panda III's length ranges around 3.7 meters (145.7 inches), which is slightly shorter than the Mini Countryman at approximately 4.1 meters (161.6 inches) and close to the Suzuki Ignis at about 3.7 meters as well. In terms of width, the Panda is narrower at 1.66 meters (65.4 inches) excluding mirrors, enhancing maneuverability in tight urban spaces relative to some competitors. Its lighter weight and smaller footprint contribute to nimble handling and ease of parking, key factors in the crowded city car segment.

The Fiat Panda III City Cross offers a practical and somewhat roomy interior for a car in the small hatchback category. Its height of 1635 mm (64.4 inches) contributes to comfortable headroom for front and rear passengers. The cabin accommodates up to five occupants, with sufficient legroom given the compact overall length. Although interior width is modest due to the car's narrow overall width, the upright seating design helps maximize perceived space. The Panda III City Cross is designed primarily for city driving, focusing on functionality and easy ingress and egress, making it a convenient choice for daily commuting and short family trips.

The Fiat Panda III City Cross features a distinct SUV-inspired design that differentiates it from the standard Panda hatchback. This includes rugged body cladding around the wheel arches, rugged bumpers, and increased ride height that improve ground clearance and provide a more commanding driving position. The City Cross trim typically includes roof rails, stylish skid plates, and special badging, all contributing to a more adventurous and urban off-road look although the vehicle is primarily front-wheel-drive and aimed at urban environments. These design details lend the Panda III City Cross a unique personality within the small car segment.

The Fiat Panda III City Cross excels as a practical city car due to its compact exterior dimensions, making it easy to navigate through congested streets and park in tight spaces. The relatively light curb weight between 980 kg and 1090 kg (2161 to 2403 lbs) aids in fuel efficiency and sharp handling. Its elevated ride height and compact SUV-like styling provide better visibility in traffic and a more confident driving experience. Additionally, the flexible cargo space—225 liters (7.95 cubic feet) expanding to 870 liters (30.7 cubic feet) with folded rear seats—means it can adjust to various urban hauling needs, from grocery runs to carrying larger items occasionally.