1990 Dodge Ram 150 Conventional Cab (D/W, facelift 1990) Dimensions, Size & Specs

The maximum weight (GVWR - Gross Vehicle Weight Rating) of the 1990-1993 Dodge Ram 150 Conventional Cab is 2359 kg (5201 lbs). This weight includes the vehicle itself along with the maximum allowable load of passengers, cargo, and fuel. This weight rating positions the Ram 150 as a capable pickup truck suitable for moderate-duty hauling and towing tasks common in light commercial and personal use scenarios.

With a length of 4846 mm (190.7 inches) and a width of 1754 mm (69.0 inches), the 1990-1993 Dodge Ram 150 Conventional Cab generally fits into most standard residential garages. Typical single-car garages measure about 2438 mm (96 inches) wide and 6096 mm (240 inches) deep, which provides adequate space for this truck's footprint. However, garage height clearance should also be considered. Since this Ram is a conventional cab truck with modest height compared to extended cabs or larger pickups, it typically poses no clearance issues in standard residential garages.

Compared to its predecessor, the 1990-1993 Dodge Ram 150 Conventional Cab received a facelift but maintained similar overall dimensions. The length remained close to 4846 mm (190.7 inches), and width was roughly 1754 mm (69.0 inches), preserving the truck’s traditional full-size profile. The facelift mainly updated styling cues rather than significantly altering size or chassis. This continuity helped Dodge retain loyal customers who preferred the familiar size and handling characteristics while offering a refreshed appearance for the early 1990s market.

The 1990-1993 Dodge Ram 150 Conventional Cab is equipped with tires sized 205/75 R15. This tire specification balances ride comfort, road grip, and load capacity appropriate for a light-duty pickup of its era. The 205 mm width provides adequate traction, while the 75 aspect ratio (sidewall height) contributes to a smoother ride over rough surfaces. On the 15-inch (38.1 cm) wheel diameter, these tires offer a good compromise between durability and ride quality for the truck's intended utility.

The 1990-1993 Dodge Ram 150 Conventional Cab's dimensions of 4846 mm (190.7 in) in length and 1754 mm (69 in) in width place it firmly within the typical full-size pickup segment of the early '90s. When compared to competitors like the Ford F-150 or Chevrolet C/K series from the same period, the Dodge Ram was slightly more compact in width but similarly long, providing comparable cargo capacity with a slightly narrower footprint. This made the Ram slightly easier to maneuver in tighter spaces without sacrificing the essential utility expected from trucks in its class.

Given its conventional cab design and overall exterior dimensions (4846 mm length and 1754 mm width), the 1990-1993 Dodge Ram 150 provides a straightforward and utilitarian interior space primarily focused on driver and passenger comfort for two or three occupants. The cab prioritizes functional space rather than luxury, with straightforward controls and seating arrangements that optimize available room. While rear passenger space is limited or non-existent due to the conventional cab, the interior generally allows sufficient headroom and legroom for front occupants, consistent with trucks of this type and era.

While the exact height for the 1990-1993 Dodge Ram 150 Conventional Cab is not specified here, typical height for similar trucks from this era ranges between 1700 mm and 1800 mm (66.9 to 70.9 inches). Ground clearance is normally around 200 mm (7.9 inches) or slightly more, providing sufficient capability for light off-road use and handling uneven terrain. The conventional cab design keeps the vehicle relatively low-profile compared to extended or crew cab variants, aiding in stability and ease of entry and exit.

Based on its maximum permitted weight of 2359 kg (5201 lbs) and structural design typical of early 1990s pickups, the 1990-1993 Dodge Ram 150 Conventional Cab is optimized for moderate payload capacities, often around 700-900 kg (1543-1984 lbs) depending on exact configuration. This capacity enables the truck to handle typical light-to-medium hauling tasks, such as transporting building materials, equipment, or recreational gear. Its robust chassis and conventional cab style ensure durability and practicality for everyday utility.

The 1990 facelift of the Dodge Ram 150 Conventional Cab primarily introduced updated exterior styling, including a revised front grille, headlights, and minor trim changes, refreshing the truck's appearance for early 1990s buyers. Mechanically, it largely carried over the reliable components from previous models, maintaining the same chassis dimensions and drivetrain options. This facelift did not drastically alter interior space or overall dimensions but helped Dodge stay competitive aesthetically while retaining the durability and utility that the Ram 150 was known for.