1991 Daewoo Prince Dimensions, Size & Specs

The Daewoo Prince weighs in at approximately 1260 kilograms (around 2778 pounds) curb weight. This moderate weight contributes to a balanced driving experience, allowing the sedan to maintain reasonable fuel efficiency while still offering stable handling on the road. The weight aids in providing a comfortable ride by absorbing road vibrations and enhancing traction without compromising acceleration or maneuverability excessively.

The Daewoo Prince offers a luggage capacity of 460 liters (about 16.2 cubic feet), making it quite practical for everyday family needs or longer trips. This capacity is ample for several suitcases, grocery bags, or travel equipment, ensuring that passengers can store their belongings conveniently without sacrificing passenger comfort. It strikes a good balance between interior passenger space and cargo volume.

The Daewoo Prince is equipped with 14-inch rims paired with 195/70 R14 tires. These tire dimensions provide a good balance between ride comfort and handling stability. The tire width of 195 mm promotes sufficient grip on various road surfaces, while the 70 aspect ratio offers cushioning to absorb minor shocks, enhancing the overall ride quality. This setup is typical for sedans of this era and size.

Yes, the Daewoo Prince fits comfortably into a standard residential garage. With a length of 4802 mm (189.1 inches or about 15.7 feet), a width of 1720 mm (67.7 inches or roughly 5.6 feet), and a height of 1417 mm (55.8 inches or about 4.65 feet), most average garages, which are typically at least 2.4 meters wide and 5 meters deep (8 feet by 16.5 feet), will accommodate this sedan easily with enough room to walk around or store additional items.

The Daewoo Prince is essentially a rebadged and slightly updated version of the SsangYong Prince and is closely related to the old Mercedes-Benz E-Class (W123 platform) on which it was based. While it retained the large sedan dimensions typical of its predecessor, the Prince incorporated some modern updates in features but remained similar in size at 4802 mm in length, 1720 mm in width, and 1417 mm in height. The curb weight and luggage capacity also stayed competitive with its predecessor’s configuration, ensuring no significant changes in size but improvements in reliability and local market adaptation.

Compared to other mid-size sedans in the early 1990s, such as the Toyota Camry or Honda Accord of the same era, the Daewoo Prince is somewhat longer with a length of 4802 mm (189.1 in), while typical competitors measured around 4700-4800 mm (185-189 in). Its width at 1720 mm (67.7 in) is slightly narrower than some Western rivals, and the lower height of 1417 mm (55.8 in) gives it a somewhat sleeker profile. Overall, it matches or slightly exceeds many competitors in length, providing generous interior space, especially in legroom, aligning with the traditional executive sedan segment.

The Daewoo Prince’s considerable exterior dimensions, especially its length of 4802 mm (189.1 inches) and width of 1720 mm (67.7 inches), translate into a fairly spacious cabin for passengers. The sedan accommodates five passengers comfortably, with enough legroom and headroom for both front and rear occupants. The relatively low height of 1417 mm (55.8 inches) complements the car's aerodynamic styling but still allows sufficient interior head clearance, helping provide an overall balance of comfort and style for the driver and passengers.

The Daewoo Prince uses 14-inch rims fitted with 195/70 R14 tires, a size that balances ride comfort with responsive handling and reliable traction. The tire’s 195 mm width enhances grip during cornering, while the 70% sidewall height (aspect ratio) absorbs road imperfections, resulting in a smoother ride and reduced road noise. This setup also contributes positively to braking performance and stability under various driving conditions, making it well-suited for a mid-range executive sedan designed for both city and highway use.

The Daewoo Prince produced between 1993 and 1999 was notable for being based on the Mercedes-Benz W123 platform, which was renowned for durability and engineering excellence. This gave the Prince a robust body structure and luxurious ride quality typical of European executive sedans, combined with Daewoo’s affordability and local servicing advantages. The car featured a traditional sedan silhouette with conservative styling, aimed to offer reliability, comfortable space, and solid performance, appealing to buyers seeking a premium yet affordable sedan in the South Korean market during the 1990s.