2002 Citroen Berlingo I (Phase II, 2002) Dimensions, Size & Specs

The curb weight of the Berlingo I (Phase II, 2002) ranges from 1125 to 1269 kilograms (2480 to 2795 pounds). This relatively light weight for a minivan enhances fuel efficiency and allows for agile handling in urban environments. The light curb weight also contributes to easier parking and maneuvering despite its utilitarian size. However, the vehicle’s weight is sufficient to provide a stable and comfortable ride under various driving conditions, balancing performance with practicality.

The Citroën Berlingo I (Phase II) boasts a highly versatile cargo capacity tailored to different needs. With the rear seats in place, it offers 624 liters (approximately 22 cubic feet) of luggage space, ideal for groceries, small luggage, and daily use. When the rear seats are folded flat, the cargo space dramatically increases to 2800 liters (about 99 cubic feet), making it suitable for transporting large items, bulky equipment, or significant luggage loads. This flexibility is one of the Berlingo's key strengths as a family and commercial vehicle.

Yes, the Berlingo I (Phase II, 2002) generally fits into a standard residential garage. Standard garages usually measure around 2400 to 2700 mm (94.5 to 106 inches) in width and roughly 4800 mm (189 inches) in length. With the Berlingo's width at 1724 mm (67.9 inches) and length of 4137 mm (162.8 inches), you should have adequate clearance on all sides for safe parking. The height of 1810 mm (71.3 inches) also fits comfortably within typical garage door heights, which frequently start at about 2000 mm (78 inches). However, it’s recommended to measure your garage specifically to ensure ample clearance, especially if adding roof racks or accessories.

The Berlingo I (Phase II) has a maximum gross vehicle weight (GVW) between 1780 and 1920 kilograms (3924 to 4233 pounds), depending on the specific configuration and trim. The GVW includes the vehicle's curb weight plus the maximum allowable payload—passengers, cargo, and any extra equipment. This capacity makes the Berlingo suitable for light commercial use and family transport, striking a balance between carrying capability and fuel efficiency without compromising safety.

The Berlingo I (Phase II) typically uses 14-inch rims with the specifications of 5.5J x 14, supporting tire sizes of either 175/70 R14 or 185/65 R14. These tire dimensions provide a good balance between ride comfort, handling, and durability. The relatively modest rim and tire size contribute to a smoother ride and manageable road grip, which is important for a vehicle designed for both family and light utility purposes. These sizes also make replacement tires reasonably affordable and widely available.

Compared to its predecessor, the Berlingo I Phase I (1996–2002), the Phase II refresh introduced in 2002 retained largely the same footprint and overall dimensions to maintain its practicality but included some minor tweaks in styling and interior layout. Both generations share a similar length close to 4137 mm (162.8 inches), width around 1724 mm (67.9 inches), and height near 1810 mm (71.3 inches), ensuring consistent cargo volume and passenger space. The Phase II brought improvements in interior ergonomics and updated features rather than significant changes in size, which helped it maintain its well-regarded compact minivan status without sacrificing its cargo and seating versatility.

When compared to contemporaries like the Peugeot Partner (often sharing the same platform), Renault Kangoo, or Fiat Doblo from the early 2000s, the Berlingo I (Phase II) matches closely in dimensions and utility. Its length of 4137 mm (162.8 inches) and width of 1724 mm (67.9 inches) place it comfortably within the compact van/minivan category, offering similar interior volume and cargo capacity. The cargo capacity of 624 liters with the seats up, expanding to 2800 liters folded, is competitive and often superior to direct rivals, making it a preferred choice for both families and small businesses requiring adaptable cargo space.

The interior height of the Berlingo I (Phase II) closely aligns with its overall height of 1810 mm (71.3 inches), providing generous headroom for passengers. This translates into a spacious cabin environment where adults can sit comfortably without feeling cramped, particularly beneficial for taller passengers or when used on longer journeys. The relatively tall roof also offers easier ingress and egress compared to lower vehicles and increases the versatility for installing roof-mounted storage or equipment, enhancing its appeal as a practical family or commercial vehicle.

The Berlingo I (Phase II) was designed with practicality and user-friendliness as priorities. Its boxy shape maximizes interior volume, supporting flexible seating arrangements and abundant cargo space. Sliding rear doors (available on some versions) allow easy access in tight spaces, while multiple storage compartments and utility-oriented trims enhance daily usability. The vehicle's suspension and chassis tuning offer a comfortable ride despite its utilitarian design. These features combined make the Berlingo a reliable choice for families and tradespeople seeking a versatile and efficient minivan.