1987 Chrysler LE Baron Cabrio Dimensions, Size & Specs

The width of the Chrysler LE Baron Cabrio ranges between 1757 mm and 1758 mm (about 69.2 to 69.2 inches). This moderate width strikes a good balance between interior space for passengers and exterior dimensions suitable for driving in typical city traffic. It helps ensure the car remains relatively easy to park and maneuver while providing enough shoulder room in the cabin for passengers, adding to overall comfort and usability.

The height of the Chrysler LE Baron Cabrio varies between 1331 mm to 1372 mm (52.4 to 54.0 inches). Being a cabriolet, its roofline is relatively low which enhances aerodynamic efficiency and gives the car a sporty and sleek profile. The lower height improves handling because of a lower center of gravity, contributing to driving stability. However, this may also mean slightly reduced headroom compared to sedans or SUVs, but typical for convertibles. In terms of parking and garage clearance, this height generally allows it to fit easily in most standard garages.

The curb weight of the Chrysler LE Baron Cabrio spans from 1380 kg to 1565 kg (roughly 3042 to 3451 lbs), depending on model variation and optional equipment. The maximum allowable weight, inclusive of passengers, cargo, and fuel, ranges between 1840 kg and 1855 kg (around 4057 to 4090 lbs). This weight range is typical for a mid-size convertible of its era, balancing structural integrity and performance. The variations reflect different trim levels or additional features that affect the vehicle's overall mass.

The Chrysler LE Baron Cabrio offers a luggage capacity of approximately 292 liters (about 10.31 cubic feet). For a convertible, this is a reasonable trunk size, allowing a moderate amount of baggage suitable for daily errands or weekend trips. Keep in mind that with the convertible top down or retracted, luggage space may be somewhat compromised compared to typical sedans or hatchbacks, but it still accommodates essential items efficiently.

Yes, the Chrysler LE Baron Cabrio is well-suited to fit into a standard residential garage. Given its length of approximately 4694-4696 mm (about 185 inches), width around 1757-1758 mm (approximately 69 inches), and height ranging from 1331-1372 mm (52-54 inches), it fits comfortably within typical garage dimensions, which often measure around 6 meters (240 inches) deep, 3 meters (120 inches) wide, and 2.1 to 2.4 meters (83 to 95 inches) tall. Its convertible nature with a low roofline further eases clearance concerns.

Compared to its predecessors in the Chrysler LeBaron lineup, the LE Baron Cabrio from the generation produced between 1986 and 1996 features subtle dimensional refinements. Generally, this generation maintained similar length and width proportions but improved aerodynamics and styling. Length at around 4695 mm is comparable, though newer designs often enhanced weight distribution and safety structures, which occasionally affected curb weight slightly. The height of this generation was typically lower or more streamlined, reflecting design trends. Such updates generally resulted in better handling and comfort compared to predecessor models.

When compared to other convertibles produced in the late 1980s and early 1990s, the Chrysler LE Baron Cabrio fits comfortably in the mid-size convertible category. For example, it is lengthwise similar to the Ford Mustang convertible of the time but slightly wider than smaller roadsters like the Mazda MX-5 Miata, which debuted later. Its 292-liter trunk capacity is superior to many smaller convertibles, which often suffer limited storage space. The LE Baron’s curb weight is heavier compared to sportier models but aligns with its more luxurious American cruiser positioning, offering additional comfort and equipment.

The Chrysler LE Baron Cabrio typically comes with 15-inch rims, equipped with tires sized either at 195/70 R14 or 205/60 R15, depending on the model year or trim. These tire sizes balance comfort and stability, with wider tires like the 205/60 R15 improving grip and handling dynamics. The tensile profile also contributes to ride smoothness, important for a cruiser convertible designed for comfortable touring rather than aggressive sporty driving. The tire and rim sizing supports adequate traction and road feedback while maintaining the classic aesthetic of the vehicle.

The Chrysler LE Baron Cabrio, produced from 1986 to 1996, is a mid-size luxury convertible that blends classic American styling with the comfort and amenities expected from a premium vehicle of its time. It features a front-engine, front-wheel-drive layout, with a variety of inline-four and V6 engine options across its production years. The car is known for a smooth ride, spacious interior, and a well-appointed cabin equipped with features like power steering, power brakes, and options for air conditioning and leather seats in higher trims. Its soft-top convertible design allowed for open-air driving while maintaining structural rigidity and safety for daily usability.