1993 Chrysler Concorde Dimensions, Size & Specs

The curb weight of the 1993 Chrysler Concorde ranges between 1534 kg to 1542 kg (approximately 3383 to 3400 pounds). This weight range reflects the sedan’s build quality and the inclusion of standard luxury features. The moderate curb weight allows for decent performance considering the era’s engine technology, balancing power with fuel efficiency. While heavier than compact sedans, the Concorde’s weight is typical for a full-size sedan, contributing to stable handling and a comfortable ride.

The 1993 Chrysler Concorde provides a luggage capacity of 473 liters, which is approximately 16.7 cubic feet. This trunk space is generous for a full-size sedan of its time and is sufficient to accommodate luggage for a small family or a couple on a road trip. The trunk’s wide opening and flat floor facilitate easy loading and unloading, enhancing practicality for everyday use as well as travel.

Yes, the 1993 Chrysler Concorde fits comfortably in a standard residential garage. With a length of 5152 mm (approximately 16.9 feet) and width of 1890 mm (about 6.2 feet), it requires a garage space that typically ranges around 6 meters (19.7 feet) long and 3 meters (9.8 feet) wide. The height of 1429 mm (4.7 feet) does not pose any clearance issues for standard garages. However, owners should allow additional space around the vehicle for ease of movement and door opening.

The 1993 Chrysler Concorde uses tires sized 205/70 R15. These tires have a moderate aspect ratio (70), indicating a decent sidewall height that helps absorb road imperfections, contributing to a smooth and comfortable ride. The 15-inch wheel diameter was common for sedans of this era and provides a good balance between ride comfort and handling performance. The width of 205 mm ensures adequate grip for stable road handling.

The 1993 Chrysler Concorde marked a significant evolution from its predecessor, the Dodge Intrepid/Chrysler New Yorker generation in the early '90s, despite being a new model line. The Concorde featured a longer wheelbase and overall length (5152 mm or 16.9 feet), delivering enhanced interior space and passenger comfort. Design-wise, it adopted Chrysler’s ‘cab-forward’ architecture, pushing the wheels towards the corners for better stability and increased cabin room. Its width of 1890 mm (6.2 feet) is slightly broader than many predecessors, enhancing not just passenger space but road presence. This generation also emphasized aerodynamics and modern styling, aiming to offer an upscale alternative in the full-size sedan segment.

During the early 1990s, the 1993 Chrysler Concorde was competitively sized among full-size sedans. With a length of 5152 mm (16.9 feet) and a width of 1890 mm (6.2 feet), it was comparable to or slightly larger than rivals like the Ford Taurus and Chevrolet Lumina, which typically measured around 5 meters (16.4 feet) in length. The Concorde’s cab-forward design allowed it to maximize interior space without significantly increasing exterior dimensions. Its luggage capacity of 473 liters (16.7 cubic feet) was also competitive. Overall, the Concorde balanced size and passenger comfort effectively against contemporaries.

The 1993 Chrysler Concorde’s interior space benefits significantly from its cab-forward design and overall dimensions: a length of 5152 mm and width of 1890 mm. This design philosophy maximized cabin room by extending the windshield forward and pushing the wheels to the corners, providing increased legroom, headroom, and shoulder room for passengers in both front and rear seats. The slightly lower vehicle height of 1429 mm contributes to a sleek exterior but does not significantly impact headroom due to thoughtful interior packaging. As a result, passenger comfort is a strong suit, making it suitable for long journeys and daily commuting alike.

The 1993 Chrysler Concorde was primarily equipped with Chrysler's 3.5-liter V6 engine, producing approximately 214 horsepower, depending on the specific trim and market. This engine delivered smooth acceleration and adequate power for a full-size sedan, combined with front-wheel drive for predictable handling. The chassis and suspension were tuned for comfort, emphasizing a smooth ride rather than sporty handling. Features like power steering, power brakes, and various comfort options were available to complement the Concorde’s positioning as a family-friendly, comfortable sedan.

While the 1993 Chrysler Concorde offers generous interior space and trunk capacity, its larger footprint means it can be less maneuverable in tight urban environments or parking lots compared to smaller sedans. The curb weight of around 1534 to 1542 kg (3383 to 3400 pounds) adds to its stability but may slightly impact fuel economy, especially by today's standards. Additionally, the tire size of 205/70 R15, while comfortable, is somewhat dated, potentially requiring replacement with modern tires for safety or performance upgrades. Overall, the Concorde is tailored as a spacious, comfortable sedan rather than a compact or agile vehicle.