2011 Chrysler 300 II Dimensions, Size & Specs

The Chrysler 300 II measures 1902 millimeters (74.8 inches) in width without the mirrors. When including the side mirrors, the width is reduced to 1886 millimeters (74.3 inches), which is an unusual specification likely reflecting mirror folding or specific trims since typically mirrors increase width. This broad stance enhances stability and road grip, especially at higher speeds, but it can make parking or navigating narrow streets more challenging compared to smaller sedans. Drivers should be mindful of this width, especially when parallel parking or entering tight garage spaces.

The Chrysler 300 II stands between 1462 and 1480 millimeters tall (57.5 to 58.3 inches). This moderate height helps strike a balance between aerodynamic efficiency and ample headroom for occupants. The sedan's height contributes to a sleek profile, aiding in reducing drag and improving fuel efficiency. At the same time, it offers sufficient vertical space inside the cabin, ensuring comfort for taller passengers without compromising exterior styling. The slightly varying height may be due to different trims or suspension settings.

The curb weight of the Chrysler 300 II ranges between 1828 and 1980 kilograms (4032 to 4366 pounds). The variation in weight typically depends on engine options, trim levels, and added equipment. Heavier models generally offer more luxury features, sturdier build quality, or more powerful engines, which can enhance comfort and driving dynamics at the expense of slightly reduced fuel efficiency and acceleration. Conversely, lighter trims might deliver better fuel economy and more agile handling, but fewer amenities. Weight plays a crucial role in braking distances, ride comfort, and overall vehicle dynamics.

The Chrysler 300 II features a luggage capacity of 462 liters (approximately 16.3 cubic feet), which is quite spacious for a sedan and accommodates several suitcases or a large amount of shopping and gear. Interestingly, folding the rear seats only marginally increases the cargo volume to 465 liters (about 16.4 cubic feet), indicating limited fold-down seat flexibility or a design emphasizing a fixed trunk. This capacity is adequate for long road trips with moderate luggage requirements but might restrict transporting very bulky items without external cargo solutions.

The Chrysler 300 II has a ground clearance ranging from 111 to 120 millimeters (4.37 to 4.72 inches). This relatively low ride height, typical of luxury sedans, prioritizes aerodynamic efficiency and a low center of gravity for stable handling and a comfortable ride on paved roads. However, it may limit the car’s ability to handle rough terrains, speed bumps, or poorly maintained roads without cautious driving. Drivers should be mindful of ground clearance when navigating steep driveways or encountering road obstacles.

Standard garage dimensions typically accommodate vehicles up to about 5 meters (16.4 feet) in length and 2.4 meters (8 feet) in width. The Chrysler 300 II's length of up to approximately 5.088 meters (200.3 inches) means it closely approaches or slightly exceeds this typical garage length, which may require careful maneuvering or might not fit comfortably in smaller garages. Its width, including mirrors, is well within standard garage limits, but owners should consider door-opening space and clearance for mirrors. Overall, while the Chrysler 300 II can fit into most standard two-car or larger garages, tight single-car garages might be restrictive.

Compared to the first-generation Chrysler 300 (300 I), the 300 II expanded slightly in length and width, enhancing interior space and road presence. The 300 II's length ranges around 5066 to 5088 millimeters, which is an increase over the earlier model's approximate 5042 millimeters (198.5 inches). The width also grew to 1902 millimeters (74.8 inches), offering better stability and more cabin room. Both generations shared a similar bold, muscular design language, but the second generation incorporated modernized styling, upgraded technology, and safety features that improved overall comfort and appeal. The newer generation also provided revised suspension setup and engine options for better performance and ride quality.

The Chrysler 300 II stands out in the full-size sedan segment with its notably long and wide body, offering generous interior space and a strong road presence. Compared to rivals like the Ford Taurus, Chevrolet Impala, or Dodge Charger, the 300 II often measures slightly longer and wider, providing enhanced passenger comfort and trunk space, although competitors may offer more rear seat folding flexibility. Its curb weight is also relatively higher, emphasizing a premium build and luxury features. In terms of practicality, while the luggage space is adequate, some competitors might provide more adaptable cargo area solutions. The 300 II blends classic American luxury sedan qualities with modern amenities, appealing to buyers prioritizing stature, comfort, and style.

The Chrysler 300 II comes equipped with rim sizes of 17, 20, and a special 9J x 20 configuration, paired with corresponding tire sizes including 215/65 R17, 245/45 R20, and 245/45 ZR20. The choice of larger 20-inch wheels and low-profile tires (245/45) typically enhances the car's sporty aesthetics and cornering capabilities but may slightly reduce ride comfort due to stiffer sidewalls and less tire cushioning. On the other hand, 17-inch wheels with higher-profile tires (215/65) contribute to a smoother, more compliant ride, especially over rough or uneven surfaces. Buyers can select configurations based on preferences for handling dynamics or ride comfort.