1982 Chevrolet Camaro III Dimensions, Size & Specs

The width of the Chevrolet Camaro III is consistently 1849 mm across the generation. Converted to imperial measurements, the width is about 72.8 inches, or approximately 6.07 feet. This moderate width provides a balance between sporty handling characteristics and interior cabin space without being too wide for most roads or parking spaces.

The Camaro III's height ranges from 1270 mm to 1278 mm. Converting to imperial units, that's approximately 50 to 50.3 inches, or about 4.17 feet tall. This low roof height complements the coupe's aerodynamic profile and sporty stance, typical of muscle cars in that era.

The Camaro III offers a luggage capacity ranging from 328 to 351 liters (approximately 11.6 to 12.4 cubic feet) with the rear seats in place. When the rear seats are folded down, cargo space significantly expands to between 878 and 883 liters, which is roughly 31 to 31.2 cubic feet. This flexible storage solution makes the Camaro III relatively practical for a sporty coupe, allowing drivers to carry larger or more items when needed.

The Camaro III came with rim sizes ranging from 7J x 14 to 6J x 14 inches, and tire sizes varied across different trims and years. Common tire sizes included 205/75 R14, 205/70 R14, 195/75 R14, and 245/50 R16. These sizes reflect a balance between ride comfort, sporty performance, and handling characteristics tailored to different driving preferences and performance levels.

A standard single-car garage is typically about 3 meters (approximately 9.8 feet) wide and 6 meters (about 19.7 feet) deep. With the Camaro III's length between 4770 and 4877 mm (15.65 to 16 feet) and width at about 1849 mm (6.07 feet), it comfortably fits within these dimensions, allowing space on all sides for opening doors and maneuvering. Owners should still consider any garage storage or additional equipment that might reduce effective space but generally, the Camaro III is well suited for standard garages.

Compared to the second-generation Camaro (1970–1981), the Camaro III saw a notable size reduction, reflecting the automotive industry's shift towards more compact and fuel-efficient vehicles during the 1980s. The earlier generation was longer and wider, often exceeding 4880 mm (192 inches) in length and wider than 1849 mm. The third generation Camaro's slightly reduced length (4770–4877 mm) and width (1849 mm) improved handling and weight, contributing to better fuel economy without severely compromising interior space.

The Camaro III's dimensions are comparable to other American muscle and sports coupes of the 1980s, such as the Ford Mustang and Dodge Challenger. For example, the 1980s Ford Mustang had a length around 4700 mm (185 inches) and similar width close to 1800 mm (70.9 inches). The Camaro III generally offered slightly more luggage space with its fold-flat rear seats, balancing sporty looks with functional cargo practicality, making it competitive among its peers.

The Chevrolet Camaro III typically seats four passengers, with two front bucket seats and a rear bench. Due to its coupe design and relatively low height (1270–1278 mm), interior headroom is best suited for average-sized adults or teenagers, particularly in the front. Rear seat legroom is more limited, making the back seats better for short trips or smaller passengers. The interior layout emphasizes a sporty driving experience alongside acceptable passenger accommodation.

While specific curb weights can vary depending on model, engine, and trim, the Chevrolet Camaro III generally weighed between approximately 1200 kg to 1500 kg (2650 to 3300 lbs). This relatively moderate weight for a muscle car helped the Camaro III achieve better acceleration and handling compared to heavier predecessors. Additionally, the reduction in curb weight contributed to improved fuel economy, which was increasingly important during the 1980s due to rising fuel costs and regulatory changes.