2016 BAIC Senova X55 I Dimensions, Size & Specs

The curb weight of the BAIC Senova X55 I ranges from 1410 kg to 1431 kg (approximately 3108 to 3153 lbs). This moderate weight contributes to a stable driving experience, providing sufficient heft for good road grip without overly compromising fuel efficiency. The balance in weight helps maintain agility while driving in city traffic and stability on highways, making it a practical choice in its SUV class.

The BAIC Senova X55 I offers a ground clearance of 200 mm (7.9 inches). This clearance is quite favorable for a compact SUV, enabling it to handle moderately uneven terrain, speed bumps, and light off-road conditions comfortably. It also provides drivers with enhanced visibility on the road, making it a versatile vehicle for both urban and occasional off-road use.

The BAIC Senova X55 I comes equipped with 17-inch rims paired with tires sized 215/60 R17. These specifications strike a balance between ride comfort and road handling. The tire width of 215 mm enhances grip and stability, while the aspect ratio of 60 provides cushioning for a smoother ride over bumps and road imperfections. This combination is well-suited to the vehicle's SUV capabilities.

Yes, the BAIC Senova X55 I fits comfortably into a standard residential garage. With its length of 4405 mm (173.4 inches), width of 1809 mm (71.2 inches), and height of 1685 mm (66.3 inches), it falls within the spatial limits of most single-car garages designed to accommodate compact SUVs and sedans. Drivers should ensure the garage width and height clearances allow for some additional space for opening doors and maneuvering.

The BAIC Senova X55 I was the first generation of this model, produced from 2016 to 2018, so it does not have an earlier generation predecessor for direct dimensional comparison. However, it set the baseline in its compact SUV class with a length of 4405 mm, width of 1809 mm, and height of 1685 mm. Subsequent generations, if any, may have evolved to offer slightly different size metrics depending on market feedback and design changes.

The BAIC Senova X55 I's dimensions are competitive within the compact SUV segment. Its length of 4405 mm (173.4 inches) and width of 1809 mm (71.2 inches) put it in close range with popular models like the Hyundai Tucson and Nissan Qashqai. Its 200 mm ground clearance is slightly higher than some competitors, which typically offer around 160-180 mm, giving it better capability on rough roads. Overall, the Senova X55 I offers a spacious cabin and good external dimensions for maneuverability and comfort.

While exact interior dimensions such as legroom and headroom for the BAIC Senova X55 I are not widely published, the vehicle’s exterior size supports a comfortable cabin for five passengers. The width of 1809 mm (71.2 inches) ensures adequate shoulder space, and the height of 1685 mm (66.3 inches) provides sufficient headroom. As a compact SUV, it typically offers a higher seating position, aiding visibility and comfort for driver and passengers during longer trips.

With a moderate curb weight of about 1410-1431 kg (3108-3153 lbs), 200 mm (7.9 inches) ground clearance, and compact dimensions of 4405 mm long by 1809 mm wide, the BAIC Senova X55 I is well-suited for a mix of urban driving, suburban commuting, and light off-road or rough terrain driving. Its size offers easier parking and maneuverability in city environments, while the ground clearance supports mild off-road adventures or rural roads without compromising comfort.

The BAIC Senova X55 I’s size enables practical SUV characteristics like a higher seating position for better driver visibility and ease of ingress and egress, especially useful for families and older passengers. The 17-inch wheels combined with 215/60 R17 tires enhance ride stability and comfort, while its dimensions allow for ample cargo space without becoming too bulky for city driving. The 200 mm ground clearance also contributes to versatility in various road conditions, improving the car's overall usability.