1989 BAIC BJ 2020 Dimensions, Size & Specs

The curb weight of the BAIC BJ 2020 is 1580 kilograms (about 3483 pounds), which reflects the vehicle's weight without passengers or cargo but including all necessary fluids and standard equipment. Its maximum weight capacity reaches up to 2015 kilograms (approximately 4441 pounds), meaning it can safely carry an additional load of around 435 kilograms (959 pounds). This capacity is crucial for an off-road vehicle, as it must manage passenger weight, cargo, and any additional off-road accessories.

Standard household garages typically range from about 2400 mm (7.9 feet) in width and 4800 mm (15.7 feet) in length, with ceiling heights around 2100 mm (6.9 feet). The BAIC BJ 2020's width of 1780 mm (70.1 inches) and length of 4070 mm (160.2 inches) mean it will fit comfortably in terms of floor space in most standard garages. However, its height of 1940 mm (76.4 inches) is slightly less than typical garage ceiling height, so height clearance is generally not an issue. Always double-check specific garage dimensions before parking.

The BAIC BJ 2020 is relatively compact for an off-road vehicle of its era. At 4070 mm in length, it is shorter than many mid-size SUVs which often exceed 4500 mm. Its width of 1780 mm positions it close to average width vehicles, while its height of 1940 mm is somewhat taller, offering good ground clearance and a robust stance. This size balance provides maneuverability in tight off-road trails and urban environments alike, making it practical for various uses compared to bulkier off-road rivals.

The BAIC BJ 2020 is equipped with tires sized 215/80 R16 and rims sized 6J x 16. The tire width of 215 mm (approximately 8.5 inches) combined with an aspect ratio of 80 signifies a taller tire profile, beneficial for off-road traction and absorbing terrain irregularities. The 16-inch rim size (about 40.6 cm) is standard for off-road vehicles of this category, balancing durability with ride comfort.

The BAIC BJ 2020 introduced improvements over its predecessor by slightly increasing overall size, especially in height and width, to enhance interior space and off-road capability. While the predecessor was generally smaller and less robust, the BJ 2020's dimensions of 4070 mm length, 1780 mm width, and 1940 mm height contributed to better ground clearance and stability. Additionally, it supported a higher maximum weight, increasing usability in rugged conditions. These changes made the BJ 2020 a more versatile off-road vehicle with improved comfort and capability.

Compared to similar off-road vehicles like the Toyota Land Cruiser or Jeep Cherokee of the late '80s and '90s, the BAIC BJ 2020 is somewhat more compact. For example, the Toyota Land Cruiser often exceeds 4800 mm in length and 1900 mm in width, making it larger overall. The BJ 2020’s smaller dimensions make it more agile but may offer slightly less interior space. Performance-wise, while the Land Cruiser and Cherokee generally have stronger engines and more advanced off-road technologies, the BJ 2020 holds its own due to its lighter weight and solid engineering, making it a practical and economical off-road option.

The BAIC BJ 2020, designed as an off-road vehicle, typically accommodates five passengers comfortably, with two front seats and a rear bench seat. Its relatively compact exterior dimensions mean that interior space is optimized for utility rather than luxury. Headroom is generous due to its height of 1940 mm (76.4 inches), which enhances comfort for taller passengers. Although exact interior volume figures are not often cited, the BJ 2020 offers sufficient space for passengers and gear typical for this class of vehicle.

Yes, the BAIC BJ 2020, with its rugged size and weight profile—curb weight of 1580 kg (3483 lbs) and maximum loaded weight of 2015 kg (4441 lbs)—is engineered for serious off-road use. Its height provides good ground clearance, and its tire and rim setup supports traction on variable terrain. The vehicle's moderate size aids maneuverability on tight trails. Its weight balance allows for sufficient durability without compromising agility, making it well-suited for off-road enthusiasts who require a reliable and capable vehicle.

To maintain optimal off-road capability and ride quality, replacement tires for the BAIC BJ 2020 should match the original specification of 215/80 R16. This ensures the appropriate tire sidewall height for shock absorption on rough terrain and maintains correct speedometer readings and axle gearing. The rims should be 6J x 16 inches to fit the tires correctly and maintain structural integrity. Using these sizes preserves the vehicle’s off-road geometry and handling characteristics.