2022 Appollen S1 Dimensions, Size & Specs

The Appollen S1 measures 2069 mm (81.4 inches) in width, which is wider than many standard coupes. This wider stance enhances road stability and handling, especially at higher speeds or during cornering. However, its width can make maneuvering in tight urban spaces and parking a bit more challenging compared to narrower vehicles, requiring careful attention in cramped areas or narrow garages.

The curb weight of the Appollen S1 S1 generation is 1960 kg (4321 lbs). This relatively heavy weight reflects the car's solid build and safety features, as well as possibly high-performance components. While heavier weight can affect acceleration and fuel efficiency, the car’s engineering likely balances power and dynamics to ensure impressive performance typical of a coupe vehicle.

Standard garages typically measure about 2438 mm (96 inches) wide by 6096 mm (240 inches) deep. Given the Appollen S1's width of 2069 mm (81.4 inches) and length of 4634 mm (182.4 inches), the car will fit inside most standard garages but leaves less side clearance (approximately 369 mm or 14.5 inches on either side in an average 2438 mm wide garage). This means parking requires care to avoid contact with walls or garage contents, especially considering the car's wide body.

The Appollen S1 is equipped with 19-inch rims, coupled with tire sizes 265/35 ZR19 94Y at the front and 235/35 ZR19 87Y at the rear. These sizable tires and wide rims provide excellent grip and stability, enabling sharp handling and confident cornering. The low-profile tires improve road feedback and responsiveness, making the car agile and suited for spirited driving, though they may slightly reduce ride comfort on rough surfaces.

With a height of 1253 mm (49.3 inches), the Appollen S1 sits relatively low compared to conventional vehicles, typical of performance coupes focused on aerodynamic efficiency and a sporty design. This lower height enhances aerodynamic drag reduction, contributing to better fuel efficiency and stability at high speeds but can result in limited driver visibility, especially in traffic or crowded parking lots, requiring extra care.

As the 2022 and ongoing first-generation Appollen S1 model, there is no predecessor S1 generation to compare directly. This generation establishes the baseline dimensions and design characteristics, setting the standard for any potential future updates or successor models in terms of size, weight, and styling.

The Appollen S1's length of 4634 mm (182.4 inches) and width of 2069 mm (81.4 inches) place it in the upper mid-size category among high-performance coupes. Compared to competitors like the Porsche 911 or Audi RS5, it is slightly longer and wider, offering a more aggressive stance and potentially more interior or cargo space. The relatively low height of 1253 mm (49.3 inches) maintains a sporty profile, while its curb weight of 1960 kg (4321 lbs) is somewhat heavier than many rivals, likely due to structural reinforcements or luxury features.

The Appollen S1's considerable width of 2069 mm (81.4 inches) potentially allows for a spacious cabin width-wise, enhancing shoulder room for occupants. However, being a coupe with a low height (1253 mm / 49.3 inches), headroom might be limited, especially for taller passengers. The length of 4634 mm (182.4 inches) suggests a compact but well-balanced interior layout. Overall, the car likely emphasizes sporty seating and driver engagement over maximum interior volume but still accommodates passengers comfortably for a coupe.

The Appollen S1 S1 generation stands out with its bold dimensions—especially wide stance and low height—which enhance performance and visual appeal. Its 19-inch wheels and performance tire setup underline its sporty intentions, while the solid curb weight indicates premium materials and structural integrity. Producing from 2022 to the present, this model represents a modern interpretation of the luxury coupe offering, combining style, performance, and exclusivity in a distinctive package.